Package | Description |
---|---|
no.petroware.jwitsml | |
no.petroware.jwitsml.model | |
no.petroware.jwitsml.units | |
no.petroware.jwitsml.util |
Modifier and Type | Method and Description |
---|---|
int |
Value.compareTo(Value v)
Compare this value to the specified value.
|
void |
WitsmlQuery.setElement(String elementName,
Value value)
Set value of the specified element.
|
Modifier and Type | Method and Description |
---|---|
Value |
Lithology.Qualifier.getAbundance() |
Value |
WitsmlRig.Bop.getAccumulatorFluidCapacity() |
Value |
WitsmlRigUtilization.Bop.getAccumulatorFluidCapacity() |
Value |
WitsmlRig.Bop.getAccumulatorOperatingPressure() |
Value |
WitsmlRigUtilization.Bop.getAccumulatorOperatingPressure() |
Value |
WitsmlRig.Bop.getAccumulatorPreChargePressure() |
Value |
WitsmlRigUtilization.Bop.getAccumulatorPreChargePressure() |
Value |
WitsmlRig.Bop.getAccumulatorPreChargeVolume() |
Value |
WitsmlRigUtilization.Bop.getAccumulatorPreChargeVolume() |
Value |
GeologyInterval.Chromatograph.getAcetylene() |
Value |
WitsmlBhaRun.getActualDls()
Return the actual DLS of this BHA run.
|
Value |
WitsmlCementJob.CementStage.Fluid.Additive.getAdditiveAmount()
Return the additive amount of this additive.
|
Value |
WitsmlWellboreGeometry.getAirGap() |
Value |
WitsmlRig.getAirGap() |
Value |
WitsmlRigUtilization.getAirGap() |
Value |
Fluid.getAlkalinityP1() |
Value |
Fluid.getAlkalinityP2() |
Value |
WitsmlTubular.Component.Bend.getAngle()
Return the angle of this bend.
|
Value |
WitsmlTarget.Section.getAngle()
Return the angle of this section.
|
Value |
WitsmlCementJob.CementStage.Fluid.getApiFluidLossVolume()
Return the api fluid loss volume of this fluid.
|
Value |
WitsmlFormationMarker.getApparentThickness()
Return the apparent thickness of this formation marker.
|
Value |
Fluid.getAsg() |
Value |
GeologyInterval.Chromatograph.getAverageCO2() |
Value |
GeologyInterval.MudGas.getAverageConnectionGas() |
Value |
WitsmlCementJob.CementStage.getAverageDisplacementRate()
Return the average displacement rate of this cement stage.
|
Value |
GeologyInterval.getAverageDrillingExponent() |
Value |
GeologyInterval.getAverageEffectiveCirculatingDensity() |
Value |
GeologyInterval.Chromatograph.getAverageEthane() |
Value |
GeologyInterval.Chromatograph.getAverageH2S() |
Value |
GeologyInterval.Chromatograph.getAverageIsoButane() |
Value |
GeologyInterval.Chromatograph.getAverageIsoHexane() |
Value |
GeologyInterval.Chromatograph.getAverageIsoPentane() |
Value |
WitsmlTubular.Component.getAverageJointLength()
Return the average join length of this component.
|
Value |
GeologyInterval.Chromatograph.getAverageMethane() |
Value |
GeologyInterval.getAverageMudWeight() |
Value |
GeologyInterval.Chromatograph.getAverageNeoPentane() |
Value |
GeologyInterval.Chromatograph.getAverageNorButane() |
Value |
GeologyInterval.Chromatograph.getAverageNorHexane() |
Value |
GeologyInterval.Chromatograph.getAverageNorPentane() |
Value |
WitsmlStimJob.getAveragePressure() |
Value |
GeologyInterval.Chromatograph.getAveragePropane() |
Value |
DrillingParameters.getAveragePumpPressure() |
Value |
WitsmlOperationsReport.getAverageRop()
Return the average rop of this operations report.
|
Value |
GeologyInterval.getAverageRpm() |
Value |
WitsmlCementJob.CementStage.getAverageSqueezeFlowrate()
Return the average squeeze flowrate of this cement stage.
|
Value |
WitsmlCementJob.CementStage.getAverageSqueezePressure()
Return the average squeeze pressure of this cement stage.
|
Value |
GeologyInterval.getAverageTorque() |
Value |
DrillingParameters.getAverageTorqueDownhole() |
Value |
DrillingParameters.getAverageTorqueOffBottom() |
Value |
DrillingParameters.getAverageTorqueOnBottom() |
Value |
GeologyInterval.MudGas.getAverageTotalGas() |
Value |
GeologyInterval.getAverageWob() |
Value |
WitsmlTrajectory.Station.Corrections.getAxialMagneticDrillstring()
Return the axial magnetic drillstring of this corrections.
|
Value |
WitsmlTubular.Component.getAxialStiffness()
Return the axial stiffness of this component.
|
Value |
WitsmlTrajectory.Station.getAzimuth()
Return the azimuth of this station.
|
Value |
DrillingParameters.getAzimuthBottom() |
Value |
WitsmlTrajectory.getAzimuthOfVerticalSection()
Return the azimuth of vertical section of this trajectory.
|
Value |
DrillingParameters.getAzimuthTop() |
Value |
WitsmlCementJob.CementStage.getBackPressure()
Return the back pressure of this cement stage.
|
Value |
WitsmlCementJob.CementStage.Fluid.PumpSchedule.getBackPressure()
Return the back pressure of this pump schedule.
|
Value |
Fluid.getBarite() |
Value |
WitsmlConventionalCore.getBarrelLength()
Return the barrel length of this conventional core.
|
Value |
WitsmlCementJob.CementStage.Fluid.getBaseFluidDensity()
Return the base fluid density of this fluid.
|
Value |
WitsmlWell.Crs.MapProjection.getBearing()
Return the bearing of this map projection.
|
Value |
WitsmlTubular.Component.Motor.getBearingBoxClearance()
Return the bearing box clearance of this motor.
|
Value |
WitsmlFormationMarker.getBedThickness()
Return the bed thickness of this formation marker.
|
Value |
WitsmlTubular.Component.Bend.getBendBottomDistance()
Return the bend bottom distance of this bend.
|
Value |
WitsmlTubular.Component.getBendStiffness()
Return the bend stiffness of this component.
|
Value |
WitsmlTrajectory.Station.CovarianceMatrix.getBiasEast()
Return the bias east of this covariance matrix.
|
Value |
WitsmlTrajectory.Station.CovarianceMatrix.getBiasNorth()
Return the bias north of this covariance matrix.
|
Value |
WitsmlTrajectory.Station.CovarianceMatrix.getBiasVertical()
Return the bias vertical of this covariance matrix.
|
Value |
WitsmlConventionalCore.getBitDiameter()
Return the bit diameter of this conventional core.
|
Value |
WitsmlTubular.Component.Bit.getBitDiameter()
Return the bit diameter of this bit.
|
Value |
DrillingParameters.getBitHydraulic() |
Value |
WitsmlRisk.getBitMdEnd()
Return the bit MD end of this risk.
|
Value |
WitsmlRisk.getBitMdStart()
Return the bit MD start of this risk.
|
Value |
DrillingParameters.getBitNozzleAverageVelocity() |
Value |
DrillingParameters.getBitOperatingTime() |
Value |
WitsmlTubular.Component.Stabilizer.getBladeBottomDistance()
Return the blade bottom distance of this stabilizer.
|
Value |
WitsmlTubular.Component.Stabilizer.getBladeLength()
Return the blade length of this stabilizer.
|
Value |
WitsmlRig.getBlockRating() |
Value |
WitsmlRig.getBlockWeight() |
Value |
WitsmlRig.Degasser.getBlowdownCapacity() |
Value |
WitsmlRigUtilization.Degasser.getBlowdownCapacity() |
Value |
WitsmlRig.Bop.getBoosterLineInnerDiameter() |
Value |
WitsmlRigUtilization.Bop.getBoosterLineInnerDiameter() |
Value |
WitsmlRig.Bop.getBoosterLineLength() |
Value |
WitsmlRigUtilization.Bop.getBoosterLineLength() |
Value |
WitsmlRig.Bop.getBoosterLineOuterDiameter() |
Value |
WitsmlRigUtilization.Bop.getBoosterLineOuterDiameter() |
Value |
WitsmlCementJob.CementStage.getBottomHoleCirculatingTemperature()
Return the bottom hole circulating temperature of this cement stage.
|
Value |
WitsmlCementJob.CementStage.getBottomHoleStaticTemperature()
Return the bottom hole static temperature of this cement stage.
|
Value |
WitsmlStimJob.getBottomStaticTemperature() |
Value |
WitsmlRig.getBrakeDescription() |
Value |
WitsmlCementJob.CementStage.getBreakdownFlowrate()
Return the breakdown flowrate of this cement stage.
|
Value |
WitsmlCementJob.CementStage.getBreakdownPressure()
Return the breakdown pressure of this cement stage.
|
Value |
Fluid.getBrine() |
Value |
WitsmlTrajectory.Station.getBuildRate()
Return the build rate of this station.
|
Value |
WitsmlRig.getBulkCementCapacity() |
Value |
GeologyInterval.getBulkDensity() |
Value |
WitsmlRig.getBulkMudStorageCapacity() |
Value |
WitsmlCementJob.CementStage.getBumpPressure()
Return the bump pressure of this cement stage.
|
Value |
WitsmlTubular.Component.getBurstPressure()
Return the burst pressure of this component.
|
Value |
WitsmlWellboreGeology.CuttingsIntervalSet.CuttingsInterval.getCalcimetry() |
Value |
GeologyInterval.getCalcimetry() |
Value |
WitsmlWellboreGeology.CuttingsIntervalSet.CuttingsInterval.getCalcite() |
Value |
GeologyInterval.getCalcite() |
Value |
Fluid.getCalcium() |
Value |
Fluid.getCalciumChloride() |
Value |
WitsmlRigUtilization.getCapBulkCement() |
Value |
WitsmlRigUtilization.getCapBulkMud() |
Value |
WitsmlRigUtilization.getCapDrillWater() |
Value |
WitsmlRigUtilization.getCapFuel() |
Value |
WitsmlRigUtilization.getCapLiquidMud() |
Value |
WitsmlRigUtilization.getCapPotableWater() |
Value |
WitsmlOperationsReport.getCasingDiameter()
Return the casing diameter of this operations report.
|
Value |
WitsmlOperationsReport.getCasingMd()
Return the casing MD of this operations report.
|
Value |
WitsmlCementJob.CementStage.getCasingPressureEnd()
Return the casing pressure end of this cement stage.
|
Value |
WitsmlCementJob.CementStage.getCasingPressureStart()
Return the casing pressure start of this cement stage.
|
Value |
WitsmlOperationsReport.getCasingTvd()
Return the casing TVD of this operations report.
|
Value |
WitsmlCementJob.CementTest.getCementBondLogPressure()
Return the cement bond log pressure of this cement test.
|
Value |
WitsmlCementJob.CementStage.Fluid.getCementVolume()
Return the cement volume of this fluid.
|
Value |
WitsmlWell.Crs.MapProjection.getCentralMeridian()
Return the central meridian of this map projection.
|
Value |
Fluid.getChloride() |
Value |
Fluid.getChlorideCorrectedSolids() |
Value |
WitsmlRig.Bop.getChokeLineInnerDiameter() |
Value |
WitsmlRigUtilization.Bop.getChokeLineInnerDiameter() |
Value |
WitsmlRig.Bop.getChokeLineLength() |
Value |
WitsmlRigUtilization.Bop.getChokeLineLength() |
Value |
WitsmlRig.Bop.getChokeLineOuterDiameter() |
Value |
WitsmlRigUtilization.Bop.getChokeLineOuterDiameter() |
Value |
WitsmlRig.Bop.getChokeManifoldPressure() |
Value |
WitsmlRigUtilization.Bop.getChokeManifoldPressure() |
Value |
WitsmlCementJob.CementStage.getCirculateVolumeStart()
Return the circulate volume start of this cement stage.
|
Value |
WitsmlOperationsReport.getCirculatingTime()
Return the circulating time of this operations report.
|
Value |
DrillingParameters.getCirculationTime() |
Value |
WitsmlTubular.Component.RotarySteerableTool.getClosedPadOuterDiameter() |
Value |
WitsmlTubular.Component.getCollapsePressure()
Return the collapse pressure of this component.
|
Value |
WitsmlCementJob.CementStage.Fluid.getCompressiveStrengthPressure1()
Return the compressive strength pressure1 of this fluid.
|
Value |
WitsmlCementJob.CementStage.Fluid.getCompressiveStrengthPressure2()
Return the compressive strength pressure2 of this fluid.
|
Value |
WitsmlCementJob.CementStage.Fluid.getCompressiveStrengthTemperature1()
Return the compressive strength temperature1 of this fluid.
|
Value |
WitsmlCementJob.CementStage.Fluid.getCompressiveStrengthTemperature2()
Return the compressive strength temperature2 of this fluid.
|
Value |
WitsmlCementJob.CementStage.Fluid.getCompressiveStrengthTime1()
Return the compressive strength time1 of this fluid.
|
Value |
WitsmlCementJob.CementStage.Fluid.getCompressiveStrengthTime2()
Return the compressive strength time2 of this fluid.
|
Value |
WitsmlMudLog.Parameter.getConcentration()
Return the concentration of this parameter.
|
Value |
WitsmlCementJob.CementStage.Fluid.Additive.getConcentration()
Return the concentration of this additive.
|
Value |
WitsmlRig.Bop.getConnectionSize() |
Value |
WitsmlRigUtilization.Bop.getConnectionSize() |
Value |
WitsmlCementJob.CementStage.Fluid.getConsistencyIndex()
Return the consistency index of this fluid.
|
Value |
WitsmlCementJob.CementStage.Fluid.getConstantGasDensity()
Return the constant gas density of this fluid.
|
Value |
WitsmlCementJob.CementStage.Fluid.getConstantGasFoamDensity()
Return the constant gas foam density of this fluid.
|
Value |
WitsmlCementJob.CementStage.Fluid.getConstantGasRatioAverage()
Return the constant gas ratio average of this fluid.
|
Value |
WitsmlCementJob.CementStage.Fluid.getConstantGasRatioEnd()
Return the constant gas ratio end of this fluid.
|
Value |
WitsmlCementJob.CementStage.Fluid.getConstantGasRatioStart()
Return the constant gas ratio start of this fluid.
|
Value |
WitsmlSidewallCore.getCoreMd()
Return the core MD of this sidewall core.
|
Value |
WitsmlRig.SurfaceEquipment.getCoreOuterDiameter() |
Value |
WitsmlRigUtilization.SurfaceEquipment.getCoreOuterDiameter() |
Value |
WitsmlTubular.Component.Bit.getCost()
Return the cost of this bit.
|
Value |
WitsmlDrillingReport.StatusInfo.getCostDay() |
Value |
WitsmlDrillingReport.StatusInfo.getCostDayMud() |
Value |
WitsmlTubular.Component.Connection.getCriticalCrossSection()
Return the critical cross section of this connection.
|
Value |
WitsmlTrajectory.Station.Corrections.getCrossAcialMagneticDrillstring()
Return the cross acial magnetic drillstring of this corrections.
|
Value |
WitsmlTrajectory.Station.Corrections.getCrossAcialMagneticDrillstring2()
Return the cross acial magnetic drillstring2 of this corrections.
|
Value |
WitsmlCementJob.CementStage.getCtuPressureEnd()
Return the ctu pressure end of this cement stage.
|
Value |
WitsmlCementJob.CementStage.getCtuPressureStart()
Return the ctu pressure start of this cement stage.
|
Value |
WitsmlOperationsReport.getCurrentRop()
Return the current rop of this operations report.
|
Value |
WitsmlDrillingReport.StatusInfo.getCurrentRop() |
Value |
WitsmlConventionalCore.getCutDiameter()
Return the cut diameter of this conventional core.
|
Value |
WitsmlWellboreGeology.CuttingsIntervalSet.CuttingsInterval.getCuttingsCationicExchangeCapacity() |
Value |
GeologyInterval.getCuttingsCationicExchangeCapacity() |
Value |
GeologyInterval.Chromatograph.getCycleTime() |
Value |
WitsmlRealtime.Channel.getDataDensity()
Return the data density of this channel.
|
Value |
WitsmlLog.Curve.getDataDensity()
Return the data density of this curve.
|
Value |
WitsmlWellboreGeology.CuttingsIntervalSet.CuttingsInterval.getDensBulk() |
Value |
Fluid.getDensity() |
Value |
WitsmlCementJob.CementStage.Fluid.getDensity()
Return the density of this fluid.
|
Value |
WitsmlCementJob.CementStage.Fluid.Additive.getDensity()
Return the density of this additive.
|
Value |
WitsmlRig.getDerrickHeight() |
Value |
WitsmlRig.getDerrickRating() |
Value |
WitsmlRig.getDerrickWindCapacity() |
Value |
WitsmlDrillingReport.StatusInfo.getDiaHole() |
Value |
WitsmlTubular.Component.Nozzle.getDiameter()
Return the diameter of this nozzle.
|
Value |
WitsmlFormationMarker.getDip()
Return the dip of this formation marker.
|
Value |
WitsmlTarget.getDip()
Return the dip of this target.
|
Value |
WitsmlWellboreMarker.getDipAngle() |
Value |
WitsmlTrajectory.Station.getDipAngleUncertainty()
Return the dip angle uncertainty of this station.
|
Value |
WitsmlFormationMarker.getDipDirection()
Return the dip direction of this formation marker.
|
Value |
WitsmlWellboreMarker.getDipDirection() |
Value |
WitsmlTubular.Component.getDisplacement()
Return the displacement of this component.
|
Value |
WitsmlRig.Pump.getDisplacement() |
Value |
WitsmlRigUtilization.Pump.getDisplacement() |
Value |
WitsmlCementJob.CementStage.getDisplacementFluidDensity()
Return the displacement fluid density of this cement stage.
|
Value |
WitsmlCementJob.CementStage.getDisplacementFluidVolume()
Return the displacement fluid volume of this cement stage.
|
Value |
WitsmlCementJob.CementStage.getDisplacementPressure()
Return the displacement pressure of this cement stage.
|
Value |
WitsmlOperationsReport.getDistanceDrilled()
Return the distance drilled of this operations report.
|
Value |
WitsmlDrillingReport.StatusInfo.getDistanceDrilled() |
Value |
WitsmlOperationsReport.getDistanceDrilledRotating()
Return the distance drilled rotating of this operations report.
|
Value |
DrillingParameters.getDistanceDrilledRotating() |
Value |
WitsmlOperationsReport.getDistanceDrilledSliding()
Return the distance drilled sliding of this operations report.
|
Value |
DrillingParameters.getDistanceDrilledSliding() |
Value |
WitsmlOperationsReport.getDistanceHold()
Return the distance hold of this operations report.
|
Value |
DrillingParameters.getDistanceHold() |
Value |
WitsmlRealtime.Header.Interval.getDistanceInterval()
Return the distance interval of this interval.
|
Value |
WitsmlOperationsReport.getDistanceReamed()
Return the distance reamed of this operations report.
|
Value |
DrillingParameters.getDistanceReamed() |
Value |
WitsmlOperationsReport.getDistanceSteering()
Return the distance steering of this operations report.
|
Value |
DrillingParameters.getDistanceSteering() |
Value |
WitsmlCementJob.CementTest.getDistanceToTopOfLiner()
Return the distance to top of liner of this cement test.
|
Value |
WitsmlDrillingReport.StatusInfo.getDistDrillRot() |
Value |
WitsmlDrillingReport.StatusInfo.getDistDrillSlid() |
Value |
WitsmlDrillingReport.StatusInfo.getDistHold() |
Value |
WitsmlDrillingReport.StatusInfo.getDistReam() |
Value |
WitsmlDrillingReport.StatusInfo.getDistSteering() |
Value |
WitsmlTrajectory.Station.getDls()
Return the DLS of this station.
|
Value |
WitsmlTrajectory.Station.getDMd()
Return the d MD of this station.
|
Value |
WitsmlWellboreGeology.CuttingsIntervalSet.CuttingsInterval.getDolomite() |
Value |
GeologyInterval.getDolomite() |
Value |
WitsmlTubular.Component.Jar.getDownSetForce()
Return the down set force of this jar.
|
Value |
WitsmlTubular.Component.Jar.getDownTripForce()
Return the down trip force of this jar.
|
Value |
WitsmlRig.getDrawWorksPower() |
Value |
WitsmlRig.getDrawWorksRating() |
Value |
WitsmlRig.getDrillDepthRating() |
Value |
WitsmlRig.getDrillingDatumToPermanentDatumDistance() |
Value |
WitsmlOperationsReport.getDrillingTime()
Return the drilling time of this operations report.
|
Value |
WitsmlRig.getDrillLineDiameter() |
Value |
WitsmlRig.getDrillWaterCapacity() |
Value |
WitsmlCementJob.CementStage.Fluid.getDryBlendDensity()
Return the dry blend density of this fluid.
|
Value |
WitsmlCementJob.CementStage.Fluid.getDryBlendMass()
Return the dry blend mass of this fluid.
|
Value |
WitsmlCementJob.CementStage.Fluid.getDryBlendSackMass()
Return the dry blend sack mass of this fluid.
|
Value |
WitsmlTrajectory.Station.getDTvd()
Return the d TVD of this station.
|
Value |
WitsmlWellConstructionAndMaintenanceLedger.getDuration() |
Value |
WitsmlTrajectory.Station.getEast()
Return the east of this station.
|
Value |
WitsmlTrajectory.Station.CovarianceMatrix.getEastEast()
Return the east east of this covariance matrix.
|
Value |
Location.getEasting() |
Value |
WitsmlTarget.getEasting()
Return the easting of this target.
|
Value |
WitsmlTrajectory.Station.CovarianceMatrix.getEastVertical()
Return the east vertical of this covariance matrix.
|
Value |
WitsmlTarget.getEastWestOffset()
Return the east west offset of this target.
|
Value |
WitsmlTarget.getEastWestSectionOrigin()
Return the east west section origin of this target.
|
Value |
WitsmlRig.Pump.getEfficiency() |
Value |
WitsmlRigUtilization.Pump.getEfficiency() |
Value |
WitsmlCementJob.CementTest.getElapsedTime()
Return the elapsed time of this cement test.
|
Value |
Fluid.getElectricStability() |
Value |
WitsmlWell.Datum.getElevation()
Return the elevation of this datum.
|
Value |
WitsmlWell.ReferencePoint.getElevation()
Return the elevation of this reference point.
|
Value |
WitsmlWell.Crs.GeodeticModel.getEllipsoidInverseFlattening()
Return the ellipsoid inverse flattening of this geodetic model.
|
Value |
WitsmlWell.Crs.GeodeticModel.getEllipsoidSemiMajorAxis()
Return the ellipsoid semi major axis of this geodetic model.
|
Value |
WitsmlCementJob.CementStage.getEndFlowRate()
Return the end flow rate of this cement stage.
|
Value |
WitsmlRigUtilization.getEndHoleDepth() |
Value |
WitsmlRigUtilization.getEndOperationTime() |
Value |
WitsmlCementJob.CementStage.getEndTubingPressure()
Return the end tubing pressure of this cement stage.
|
Value |
WitsmlDrillingReport.StatusInfo.getETimCirc() |
Value |
WitsmlDrillingReport.StatusInfo.getETimDrill() |
Value |
WitsmlDrillingReport.StatusInfo.getETimDrillRot() |
Value |
WitsmlDrillingReport.StatusInfo.getETimDrillSlid() |
Value |
WitsmlDrillingReport.StatusInfo.getETimHold() |
Value |
WitsmlDrillingReport.StatusInfo.getETimLoc() |
Value |
WitsmlDrillingReport.StatusInfo.getETimReam() |
Value |
WitsmlDrillingReport.StatusInfo.getETimSpud() |
Value |
WitsmlDrillingReport.StatusInfo.getETimStart() |
Value |
WitsmlDrillingReport.StatusInfo.getETimSteering() |
Value |
WitsmlCementJob.CementStage.Fluid.getExcessRatio()
Return the excess ratio of this fluid.
|
Value |
WitsmlCementJob.CementStage.getExcessVolume()
Return the excess volume of this cement stage.
|
Value |
WitsmlWell.Crs.MapProjection.getFalseEasting()
Return the false easting of this map projection.
|
Value |
WitsmlWell.Crs.MapProjection.getFalseNorthing()
Return the false northing of this map projection.
|
Value |
WitsmlTubular.Component.getFatigueEnduranceLimit()
Return the fatigue endurance limit of this component.
|
Value |
WitsmlDepthRegistrationImage.getFileSize() |
Value |
WitsmlTubular.Component.getFishNeckInnerDiameter()
Return the fish neck inner diameter of this component.
|
Value |
WitsmlTubular.Component.getFishNeckLength()
Return the fish neck length of this component.
|
Value |
WitsmlTubular.Component.getFishNeckOuterDiameter()
Return the fish neck outer diameter of this component.
|
Value |
WitsmlRig.SurfaceEquipment.getFlangeHeight() |
Value |
WitsmlRigUtilization.SurfaceEquipment.getFlangeHeight() |
Value |
WitsmlRig.Degasser.getFlowArea() |
Value |
WitsmlRigUtilization.Degasser.getFlowArea() |
Value |
WitsmlStimJob.getFlowBackPressure() |
Value |
WitsmlStimJob.getFlowBackRate() |
Value |
WitsmlStimJob.getFlowBackVolume() |
Value |
WitsmlRig.Shaker.getFlowCapacity() |
Value |
WitsmlRig.Centrifuge.getFlowCapacity() |
Value |
WitsmlRig.Degasser.getFlowCapacity() |
Value |
WitsmlRigUtilization.Shaker.getFlowCapacity() |
Value |
WitsmlRigUtilization.Centrifuge.getFlowCapacity() |
Value |
WitsmlRigUtilization.Degasser.getFlowCapacity() |
Value |
DrillingParameters.getFlowRateAtBit() |
Value |
WitsmlStimJob.getFluidEfficiency() |
Value |
WitsmlCementJob.CementStage.Fluid.getFluidLossPeriod()
Return the fluid loss period of this fluid.
|
Value |
WitsmlCementJob.CementStage.Fluid.getFluidLossPressure()
Return the fluid loss pressure of this fluid.
|
Value |
WitsmlCementJob.CementStage.Fluid.getFluidLossTemperature()
Return the fluid loss temperature of this fluid.
|
Value |
WitsmlCementJob.CementStage.Fluid.getFluidLossVolume()
Return the fluid loss volume of this fluid.
|
Value |
WitsmlCementJob.CementStage.Fluid.getFluidVolume()
Return the fluid volume of this fluid.
|
Value |
WitsmlWellboreGeology.CuttingsIntervalSet.CuttingsInterval.getFluorescence() |
Value |
GeologyInterval.getFluorescence() |
Value |
WitsmlMudLog.Parameter.getForce()
Return the force of this parameter.
|
Value |
WitsmlRealtime.Channel.getFormationExposureTime()
Return the formation exposure time of this channel.
|
Value |
WitsmlDrillingReport.StatusInfo.getFormationStrength() |
Value |
Lithology.getFraction() |
Value |
WitsmlCementJob.CementStage.Fluid.getFreeWaterRatio()
Return the free water ratio of this fluid.
|
Value |
WitsmlCementJob.CementStage.Fluid.getFreeWaterTemperature()
Return the free water temperature of this fluid.
|
Value |
WitsmlWellboreGeometry.Section.getFrictionFactor() |
Value |
WitsmlTubular.Component.Stabilizer.getFrictionFactor()
Return the friction factor of this stabilizer.
|
Value |
WitsmlRig.getFuelCapacity() |
Value |
WitsmlCementJob.CementStage.getFunnelMudViscosity()
Return the funnel mud viscosity of this cement stage.
|
Value |
Fluid.getFunnelViscosity() |
Value |
GeologyInterval.MudGas.getGasBackground() |
Value |
WitsmlCementJob.CementStage.Fluid.getGasFoamVolume()
Return the gas foam volume of this fluid.
|
Value |
GeologyInterval.MudGas.getGasPeak() |
Value |
WitsmlRig.Degasser.getGasSearatingCapacity() |
Value |
WitsmlRigUtilization.Degasser.getGasSearatingCapacity() |
Value |
GeologyInterval.MudGas.getGasTrip() |
Value |
WitsmlTubular.Component.Stabilizer.getGaugeLengthOfBlade()
Return the gauge length of blade of this stabilizer.
|
Value |
WitsmlCementJob.CementStage.getGel10minPressure()
Return the gel10min pressure of this cement stage.
|
Value |
WitsmlCementJob.CementStage.getGel10sPressure()
Return the gel10s pressure of this cement stage.
|
Value |
WitsmlCementJob.CementStage.Fluid.getGelReading10min()
Return the gel reading10min of this fluid.
|
Value |
WitsmlCementJob.CementStage.Fluid.getGelReading10s()
Return the gel reading10s of this fluid.
|
Value |
WitsmlCementJob.CementStage.Fluid.getGelReading1min()
Return the gel reading1min of this fluid.
|
Value |
Fluid.getGels10minute() |
Value |
Fluid.getGels10second() |
Value |
Fluid.getGels30minute() |
Value |
WitsmlCementJob.CementStage.Fluid.getGelStrength10min()
Return the gel strength10min of this fluid.
|
Value |
WitsmlCementJob.CementStage.Fluid.getGelStrength1min()
Return the gel strength1min of this fluid.
|
Value |
WitsmlCementJob.CementStage.Fluid.getGetStrength10s()
Return the get strength10s of this fluid.
|
Value |
WitsmlTrajectory.Station.Corrections.getGravitationalStrength()
Return the gravitational strength of this corrections.
|
Value |
WitsmlTrajectory.Station.RawData.getGravitationalStrengthAxial()
Return the gravitational strength axial of this raw data.
|
Value |
WitsmlTrajectory.Station.RawData.getGravitationalStrengthTransverse()
Return the gravitational strength transverse of this raw data.
|
Value |
WitsmlTrajectory.Station.RawData.getGravitationalStrengthTransverseNormal()
Return the gravitational strength transverse normal of this raw data.
|
Value |
WitsmlTrajectory.Station.Corrections.getGravitationalStrengthX()
Return the gravitational strength x of this corrections.
|
Value |
WitsmlTrajectory.Station.Corrections.getGravitationalStrengthY()
Return the gravitational strength y of this corrections.
|
Value |
WitsmlTrajectory.Station.getGravitationFieldReference()
Return the gravitation field reference of this station.
|
Value |
WitsmlTrajectory.Station.getGravityUncertainty()
Return the gravity uncertainty of this station.
|
Value |
WitsmlTrajectory.Station.Corrections.getGrid()
Return the grid of this corrections.
|
Value |
WitsmlTrajectory.getGridConvergence() |
Value |
WitsmlTrajectory.getGridCorrection()
Return the grid correction of this trajectory.
|
Value |
WitsmlWell.getGroundElevation()
Return the ground elevation of this well.
|
Value |
WitsmlRigUtilization.getHeaveMx() |
Value |
WitsmlRig.Degasser.getHeight() |
Value |
WitsmlRigUtilization.Degasser.getHeight() |
Value |
WitsmlCementJob.CementStage.getHeldPressure()
Return the held pressure of this cement stage.
|
Value |
Fluid.getHighGravitySolids() |
Value |
WitsmlOperationsReport.getHoldTime()
Return the hold time of this operations report.
|
Value |
DrillingParameters.getHoldTime() |
Value |
WitsmlTubular.getHoleDiameter()
Return the hole diameter of this tubular.
|
Value |
WitsmlOperationsReport.getHoleDiameter()
Return the hole diameter of this operations report.
|
Value |
WitsmlSidewallCore.getHoleDiameter()
Return the hole diameter of this sidewall core.
|
Value |
WitsmlRisk.getHoleDiameter()
Return the hole diameter of this risk.
|
Value |
DrillingParameters.getHookloadDown() |
Value |
WitsmlRig.getHookloadRating() |
Value |
DrillingParameters.getHookloadRotating() |
Value |
DrillingParameters.getHookloadUp() |
Value |
WitsmlRig.getHookRating() |
Value |
Fluid.getHthpFilterCakeThickness() |
Value |
Fluid.getHthpFiltrate() |
Value |
Fluid.getHthpPressure() |
Value |
Fluid.getHthpTemperature() |
Value |
WitsmlConventionalCore.getInclination()
Return the inclination of this conventional core.
|
Value |
WitsmlTrajectory.Station.getInclination()
Return the inclination of this station.
|
Value |
DrillingParameters.getInclinationBottom() |
Value |
DrillingParameters.getInclinationMax() |
Value |
DrillingParameters.getInclinationMin() |
Value |
DrillingParameters.getInclinationTop() |
Value |
WitsmlRig.SurfaceEquipment.getInjectorStackHeight() |
Value |
WitsmlRigUtilization.SurfaceEquipment.getInjectorStackHeight() |
Value |
WitsmlRig.Degasser.getInletLineInnerDiameter() |
Value |
WitsmlRigUtilization.Degasser.getInletLineInnerDiameter() |
Value |
WitsmlWellboreGeometry.Section.getInnerDiameter() |
Value |
WitsmlTubular.Component.getInnerDiameter()
Return the inner diameter of this component.
|
Value |
WitsmlTubular.Component.Connection.getInnerDiameter()
Return the inner diameter of this connection.
|
Value |
WitsmlRig.Degasser.getInnerDiameter() |
Value |
WitsmlRigUtilization.Degasser.getInnerDiameter() |
Value |
WitsmlTubular.Component.MwdTool.getInnerDiameterEquivalent()
Return the inner diameter equivalent of this mwd tool.
|
Value |
WitsmlRig.Bop.Component.getInnerPassThruDiameter() |
Value |
WitsmlRigUtilization.Bop.Component.getInnerPassThruDiameter() |
Value |
WitsmlConventionalCore.getIntervalLength()
Return the interval length of this conventional core.
|
Value |
WitsmlDrillingReport.StatusInfo.getKellyBushingElevation() |
Value |
WitsmlRig.SurfaceEquipment.getKellyHoseInnerDiameter() |
Value |
WitsmlRigUtilization.SurfaceEquipment.getKellyHoseInnerDiameter() |
Value |
WitsmlRig.SurfaceEquipment.getKellyHoseLength() |
Value |
WitsmlRigUtilization.SurfaceEquipment.getKellyHoseLength() |
Value |
WitsmlRig.SurfaceEquipment.getKellyInnerDiameter() |
Value |
WitsmlRigUtilization.SurfaceEquipment.getKellyInnerDiameter() |
Value |
WitsmlRig.SurfaceEquipment.getKellyLength() |
Value |
WitsmlRigUtilization.SurfaceEquipment.getKellyLength() |
Value |
WitsmlOperationsReport.getKickTolerancePressure()
Return the kick tolerance pressure of this operations report.
|
Value |
WitsmlOperationsReport.getKickToleranceVolume()
Return the kick tolerance volume of this operations report.
|
Value |
WitsmlRig.Bop.getKillLineInnerDiameter() |
Value |
WitsmlRigUtilization.Bop.getKillLineInnerDiameter() |
Value |
WitsmlRig.Bop.getKillLineLength() |
Value |
WitsmlRigUtilization.Bop.getKillLineLength() |
Value |
WitsmlRig.Bop.getKillLineOuterDiameter() |
Value |
WitsmlRigUtilization.Bop.getKillLineOuterDiameter() |
Value |
WitsmlDrillingReport.StatusInfo.getLastCasingDiameter() |
Value |
Location.getLatitude() |
Value |
WitsmlWell.Crs.MapProjection.getLatitude1()
Return the latitude1 of this map projection.
|
Value |
WitsmlWell.Crs.MapProjection.getLatitude2()
Return the latitude2 of this map projection.
|
Value |
WitsmlWell.Crs.MapProjection.getLatitudeForScale()
Return the latitude for scale of this map projection.
|
Value |
WitsmlTubular.Component.Connection.getLeakPressureRating()
Return the leak pressure rating of this connection.
|
Value |
WitsmlTubular.Component.getLength()
Return the length of this component.
|
Value |
WitsmlTubular.Component.Nozzle.getLength()
Return the length of this nozzle.
|
Value |
WitsmlTubular.Component.Connection.getLength()
Return the length of this connection.
|
Value |
WitsmlRig.Degasser.getLength() |
Value |
WitsmlRigUtilization.Degasser.getLength() |
Value |
WitsmlTarget.Section.getLength()
Return the length of this section.
|
Value |
Fluid.getLime() |
Value |
WitsmlCementJob.CementTest.getLinearOverlapLength()
Return the linear overlap length of this cement test.
|
Value |
WitsmlRig.Pump.getLinerInnerDiameter() |
Value |
WitsmlRigUtilization.Pump.getLinerInnerDiameter() |
Value |
WitsmlRig.getLiquidMudStorageCapacity() |
Value |
Location.getLongitude() |
Value |
WitsmlWell.Crs.MapProjection.getLongitude1()
Return the longitude1 of this map projection.
|
Value |
WitsmlWell.Crs.MapProjection.getLongitude2()
Return the longitude2 of this map projection.
|
Value |
WitsmlWell.Crs.MapProjection.getLongitudeForScale()
Return the longitude for scale of this map projection.
|
Value |
Fluid.getLostCirculationMaterial() |
Value |
WitsmlOperationsReport.getLotMudWeightEquivalent()
Return the lot mud weight equivalent of this operations report.
|
Value |
WitsmlOperationsReport.getLotTvd()
Return the lot TVD of this operations report.
|
Value |
Fluid.getLowGravitySolids() |
Value |
Fluid.getLtlpFilterCakeThickness() |
Value |
Fluid.getLtlpFiltrate() |
Value |
WitsmlDrillingReport.StatusInfo.getMaasp() |
Value |
Fluid.getMagnesium() |
Value |
WitsmlTrajectory.getMagneticAngle()
Return the magnetic angle of this trajectory.
|
Value |
WitsmlTrajectory.Station.Corrections.getMagneticDeclination()
Return the magnetic declination of this corrections.
|
Value |
WitsmlTrajectory.Station.Validations.getMagneticDip()
Return the magnetic dip of this validations.
|
Value |
WitsmlTrajectory.Station.getMagneticDipAngleReference()
Return the magnetic dip angle reference of this station.
|
Value |
WitsmlTrajectory.Station.getMagneticFieldReference()
Return the magnetic field reference of this station.
|
Value |
WitsmlTrajectory.Station.RawData.getMagneticStrengthAxial()
Return the magnetic strength axial of this raw data.
|
Value |
WitsmlTrajectory.Station.RawData.getMagneticStrengthTransverse()
Return the magnetic strength transverse of this raw data.
|
Value |
WitsmlTrajectory.Station.RawData.getMagneticStrengthTransverseNormal()
Return the magnetic strength transverse normal of this raw data.
|
Value |
WitsmlTrajectory.Station.getMagneticUncertainty()
Return the magnetic uncertainty of this station.
|
Value |
WitsmlTarget.getMajorAxisLength()
Return the major axis length of this target.
|
Value |
WitsmlTubular.Component.Connection.getMakeUpTorque()
Return the make up torque of this connection.
|
Value |
WitsmlStimJob.StimJobMaterialCatalog.StimProppantAgent.getMassAbsorptionCoefficient() |
Value |
WitsmlTubular.Component.getMassPerLength()
Return the mass per length of this component.
|
Value |
WitsmlTubular.Component.Motor.getMaxBendAngle()
Return the max bend angle of this motor.
|
Value |
WitsmlTubular.Component.Stabilizer.getMaxBladeOuterDiameter()
Return the max blade outer diameter of this stabilizer.
|
Value |
WitsmlRig.Pit.getMaxCapacity() |
Value |
WitsmlRigUtilization.Pit.getMaxCapacity() |
Value |
WitsmlOperationsReport.getMaxCasingPressure()
Return the max casing pressure of this operations report.
|
Value |
GeologyInterval.Chromatograph.getMaxCO2() |
Value |
GeologyInterval.MudGas.getMaxConnectionGas() |
Value |
WitsmlWellboreGeometry.Section.getMaxDiameter() |
Value |
WitsmlRig.Bop.Component.getMaxDiameter() |
Value |
WitsmlRigUtilization.Bop.Component.getMaxDiameter() |
Value |
WitsmlCementJob.CementStage.getMaxDisplacementRate()
Return the max displacement rate of this cement stage.
|
Value |
WitsmlTubular.Component.getMaxDls()
Return the max DLS of this component.
|
Value |
WitsmlTubular.Component.RotarySteerableTool.getMaxDownLinkFlowRate() |
Value |
GeologyInterval.Chromatograph.getMaxEthane() |
Value |
WitsmlTubular.Component.Motor.getMaxFlowrate()
Return the max flowrate of this motor.
|
Value |
WitsmlTubular.Component.RotarySteerableTool.getMaxFlowRate()
Return the max flow rate of this rotary steerable tool.
|
Value |
WitsmlTubular.Component.MwdTool.getMaxFLowRate()
Return the max f low rate of this mwd tool.
|
Value |
WitsmlSurveyProgram.Section.getMaxFrequency()
Return the max frequency of this section.
|
Value |
GeologyInterval.Chromatograph.getMaxH2S() |
Value |
WitsmlRig.getMaxHeave() |
Value |
WitsmlTubular.Component.RotarySteerableTool.getMaxHoleSize() |
Value |
WitsmlRig.Pump.getMaxHydraulics() |
Value |
WitsmlRigUtilization.Pump.getMaxHydraulics() |
Value |
WitsmlBhaRun.getMaximumDls()
Return the maximum DLS of this BHA run.
|
Value |
DrillingParameters.getMaximumDowhholeMudTemperature() |
Value |
WitsmlStimJob.getMaximumFluidRate() |
Value |
WitsmlStimJob.getMaximumJobPressure() |
Value |
DrillingParameters.getMaximumTorqueOnBottom() |
Value |
WitsmlLog.Curve.getMaxIndex()
Return the max index of this curve.
|
Value |
GeologyInterval.Chromatograph.getMaxIsoButane() |
Value |
GeologyInterval.Chromatograph.getMaxIsoHexane() |
Value |
GeologyInterval.Chromatograph.getMaxIsoPentane() |
Value |
WitsmlRig.Pump.getMaxMechanicalPower() |
Value |
WitsmlRigUtilization.Pump.getMaxMechanicalPower() |
Value |
GeologyInterval.Chromatograph.getMaxMethane() |
Value |
WitsmlRig.getMaxMotionCompensation() |
Value |
GeologyInterval.Chromatograph.getMaxNeoPentane() |
Value |
GeologyInterval.Chromatograph.getMaxNorButane() |
Value |
GeologyInterval.Chromatograph.getMaxNorHexane() |
Value |
GeologyInterval.Chromatograph.getMaxNorPentane() |
Value |
WitsmlTubular.Component.Motor.getMaxOperatingTemperature()
Return the max operating temperature of this motor.
|
Value |
WitsmlTubular.Component.getMaxOuterDiameter()
Return the max outer diameter of this component.
|
Value |
WitsmlRig.Pump.getMaxPressure() |
Value |
WitsmlRigUtilization.Pump.getMaxPressure() |
Value |
GeologyInterval.Chromatograph.getMaxPropane() |
Value |
WitsmlWellboreGeology.CuttingsIntervalSet.CuttingsInterval.getMaxSize() |
Value |
GeologyInterval.getMaxSize() |
Value |
WitsmlTubular.Component.RotarySteerableTool.getMaxSpeed() |
Value |
WitsmlRig.Pump.getMaxSpeed() |
Value |
WitsmlRigUtilization.Pump.getMaxSpeed() |
Value |
WitsmlCementJob.CementStage.getMaxSqueezeFlowrate()
Return the max squeeze flowrate of this cement stage.
|
Value |
WitsmlRig.getMaxSwivelRaing() |
Value |
WitsmlTubular.Component.MwdTool.getMaxTemperature()
Return the max temperature of this mwd tool.
|
Value |
WitsmlRig.getMaxVariableDeckLoad() |
Value |
WitsmlTubular.Component.RotarySteerableTool.getMaxWeight() |
Value |
Fluid.getMbt() |
Value |
WitsmlWellboreMarker.getMd() |
Value |
Fluid.getMd() |
Value |
WitsmlRealtime.getMd()
Return the md of this realtime.
|
Value |
WitsmlRealtime.Channel.getMd()
Return the md of this channel.
|
Value |
WitsmlWell.Datum.getMd()
Return the md of this datum.
|
Value |
WitsmlWell.ReferencePoint.getMd()
Return the md of this reference point.
|
Value |
WitsmlMessage.getMd()
Return the MD of this message.
|
Value |
WitsmlOperationsReport.getMd()
Return the md of this operations report.
|
Value |
WitsmlDrillingReport.StatusInfo.getMd() |
Value |
WitsmlAttachment.getMd()
Return the MD of this attachment.
|
Value |
WitsmlSidewallCore.Sample.getMd()
Return the MD of this sample.
|
Value |
WitsmlTrajectory.Station.getMd()
Return the md of this station.
|
Value |
WitsmlFluidsReport.getMd()
Return the MD of this fluids report.
|
Value |
MdInterval.getMdBase() |
Value |
WitsmlMessage.getMdBit()
Return the MD bit of this message.
|
Value |
WitsmlAttachment.getMdBit()
Return the MD of the bit associated with this attachment.
|
Value |
WitsmlWellbore.getMdBitCurrent()
Return the MD bit current of this wellbore.
|
Value |
WitsmlWellboreGeometry.getMdBottom() |
Value |
WitsmlWellboreGeometry.Section.getMdBottom() |
Value |
WitsmlConventionalCore.getMdBottom()
Return the md bottom of this conventional core.
|
Value |
Lithology.Qualifier.getMdBottom() |
Value |
WitsmlMudLog.Parameter.getMdBottom()
Return the md bottom of this parameter.
|
Value |
WitsmlCementJob.CementStage.getMdBottom()
Return the md bottom of this cement stage.
|
Value |
WitsmlCementJob.CementStage.Fluid.getMdBottom()
Return the md bottom of this fluid.
|
Value |
GeologyInterval.getMdBottom() |
Value |
GeologyInterval.Chromatograph.getMdBottom() |
Value |
WitsmlCementJob.CementStage.getMdCirculateOut()
Return the md circulate out of this cement stage.
|
Value |
WitsmlCementJob.CementStage.getMdCoilTubing()
Return the md coil tubing of this cement stage.
|
Value |
WitsmlWellbore.getMdCurrent()
Return the MD current of this wellbore.
|
Value |
WitsmlCementJob.CementTest.getMdDiverterTool()
Return the md diverter tool of this cement test.
|
Value |
WitsmlMudLog.getMdEnd()
Return the end MD of this mud log.
|
Value |
WitsmlSurveyProgram.Section.getMdEnd()
Return the end MD of this section.
|
Value |
WitsmlRisk.getMdEnd()
Return the MD end of this risk.
|
Value |
WitsmlDrillingReport.StatusInfo.getMdFormationStrength() |
Value |
WitsmlCementJob.getMdHole()
Return the md hole of this cement job.
|
Value |
WitsmlDrillingReport.StatusInfo.getMdHoleDiameterStart() |
Value |
DrillingParameters.getMdHoleEnd() |
Value |
DrillingParameters.getMdHoleStart() |
Value |
WitsmlWellbore.getMdKickoff()
Return the MD kickoff of this wellbore.
|
Value |
WitsmlDrillingReport.StatusInfo.getMdKickoff() |
Value |
WitsmlDrillingReport.StatusInfo.getMdLastCasingDiameter() |
Value |
WitsmlFormationMarker.getMdLogSample()
Return the MD log sample of this formation marker.
|
Value |
WitsmlTrajectory.getMdMax()
Return the max MD of this trajectory.
|
Value |
WitsmlTrajectory.getMdMin()
Return the min MD of this trajectory.
|
Value |
WitsmlDrillingReport.StatusInfo.getMdPilotHolePlanned() |
Value |
WitsmlWellbore.getMdPlanned()
Return the MD planned of this wellbore.
|
Value |
WitsmlOperationsReport.getMdPlanned()
Return the md planned of this operations report.
|
Value |
WitsmlDrillingReport.StatusInfo.getMdPlanned() |
Value |
WitsmlCementJob.getMdPlugBottom()
Return the md plug bottom of this cement job.
|
Value |
WitsmlDrillingReport.StatusInfo.getMdPlugTop() |
Value |
WitsmlCementJob.getMdPlugTop()
Return the md plug top of this cement job.
|
Value |
WitsmlFormationMarker.getMdPrognosed()
Return the MD prognosed of this formation marker.
|
Value |
WitsmlCementJob.getMdShoe()
Return the md shoe of this cement job.
|
Value |
WitsmlCementJob.getMdSqueeze()
Return the md squeeze of this cement job.
|
Value |
WitsmlMudLog.getMdStart()
Return the start MD of this mud log.
|
Value |
WitsmlSurveyProgram.Section.getMdStart()
Return the start MD of this section.
|
Value |
WitsmlRisk.getMdStart()
Return the start MD of this risk.
|
Value |
WitsmlCementJob.CementStage.getMdString()
Return the md string of this cement stage.
|
Value |
WitsmlCementJob.getMdStringShoe()
Return the md string shoe of this cement job.
|
Value |
WitsmlWellbore.getMdSubSeaPlanned()
Return the MD sub sea planned of this wellbore.
|
Value |
WitsmlCementJob.CementStage.getMdTool()
Return the md tool of this cement stage.
|
Value |
WitsmlWellboreGeometry.Section.getMdTop() |
Value |
WitsmlConventionalCore.getMdTop()
Return the md top of this conventional core.
|
Value |
Lithology.Qualifier.getMdTop() |
Value |
WitsmlMudLog.Parameter.getMdTop()
Return the md top of this parameter.
|
Value |
WitsmlCementJob.CementStage.getMdTop()
Return the md top of this cement stage.
|
Value |
WitsmlCementJob.CementStage.Fluid.getMdTop()
Return the md top of this fluid.
|
Value |
MdInterval.getMdTop() |
Value |
GeologyInterval.getMdTop() |
Value |
GeologyInterval.Chromatograph.getMdTop() |
Value |
WitsmlCementJob.CementTest.getMdTopCement()
Return the md top cement of this cement test.
|
Value |
WitsmlFormationMarker.getMdTopSample()
Return the MD top sample of this formation marker.
|
Value |
WitsmlCementJob.getMdWater()
Return the md water of this cement job.
|
Value |
Fluid.getMf() |
Value |
WitsmlTubular.Component.Motor.getMinBendAngle()
Return the min bend angle of this motor.
|
Value |
WitsmlTubular.Component.Stabilizer.getMinBladeOuterDiameter()
Return the min blade outer diameter of this stabilizer.
|
Value |
GeologyInterval.Chromatograph.getMinCO2() |
Value |
WitsmlRig.Bop.Component.getMinDiameter() |
Value |
WitsmlRigUtilization.Bop.Component.getMinDiameter() |
Value |
WitsmlTubular.Component.RotarySteerableTool.getMinDownLinkFlowRate() |
Value |
GeologyInterval.Chromatograph.getMinEthane() |
Value |
WitsmlTubular.Component.Motor.getMinFlowrate()
Return the min flowrate of this motor.
|
Value |
WitsmlTubular.Component.MwdTool.getMinFlowRate()
Return the min flow rate of this mwd tool.
|
Value |
WitsmlTubular.Component.RotarySteerableTool.getMinFlowRate()
Return the min flow rate of this rotary steerable tool.
|
Value |
GeologyInterval.Chromatograph.getMinH2S() |
Value |
WitsmlTubular.Component.RotarySteerableTool.getMinHoleSize() |
Value |
DrillingParameters.getMinimumTorqueOnBottom() |
Value |
WitsmlLog.Curve.getMinIndex()
Return the min index of this curve.
|
Value |
GeologyInterval.Chromatograph.getMinIsoButane() |
Value |
GeologyInterval.Chromatograph.getMinIsoHexane() |
Value |
GeologyInterval.Chromatograph.getMinIsoPentane() |
Value |
WitsmlRig.Shaker.getMinMeshSize() |
Value |
WitsmlRigUtilization.Shaker.getMinMeshSize() |
Value |
GeologyInterval.Chromatograph.getMinMethane() |
Value |
WitsmlRig.getMinMotionCompensation() |
Value |
GeologyInterval.Chromatograph.getMinNeoPentane() |
Value |
GeologyInterval.Chromatograph.getMinNorButane() |
Value |
GeologyInterval.Chromatograph.getMinNorHexane() |
Value |
GeologyInterval.Chromatograph.getMinNorPentane() |
Value |
WitsmlTarget.getMinorAxisWidth()
Return the minor axis width of this target.
|
Value |
WitsmlTubular.Component.getMinPassThroughDiameter()
Return the min pass through diameter of this component.
|
Value |
GeologyInterval.Chromatograph.getMinPropane() |
Value |
WitsmlWellboreGeology.CuttingsIntervalSet.CuttingsInterval.getMinSize() |
Value |
GeologyInterval.getMinSize() |
Value |
WitsmlRigUtilization.getMotionCompensationMn() |
Value |
WitsmlRigUtilization.getMotionCompensationMx() |
Value |
WitsmlRig.getMotionCompensationStroke() |
Value |
WitsmlCementJob.CementStage.getMudCirculationFlowRate()
Return the mud circulation flow rate of this cement stage.
|
Value |
WitsmlCementJob.CementStage.getMudCirculationPressure()
Return the mud circulation pressure of this cement stage.
|
Value |
WitsmlCementJob.CementStage.getMudCirculationTime()
Return the mud circulation time of this cement stage.
|
Value |
DrillingParameters.getMudDensity() |
Value |
WitsmlCementJob.CementStage.getMudDensity()
Return the mud density of this cement stage.
|
Value |
GeologyInterval.Chromatograph.getMudDensityIn() |
Value |
GeologyInterval.Chromatograph.getMudDensityOut() |
Value |
WitsmlCementJob.CementStage.getMudLostVolume()
Return the mud lost volume of this cement stage.
|
Value |
Fluid.getMudPh() |
Value |
Fluid.getMudPhTemperature() |
Value |
WitsmlRig.Degasser.getMudSealDepth() |
Value |
WitsmlRigUtilization.Degasser.getMudSealDepth() |
Value |
WitsmlMudLog.Parameter.getMudWeightEquivalent()
Return the mud weight equivalent of this parameter.
|
Value |
WitsmlCementJob.CementTest.getNegativeTestEmw()
Return the negative test emw of this cement test.
|
Value |
WitsmlChannel.getNominalHoleSize() |
Value |
WitsmlChannelSet.getNominalHoleSize() |
Value |
WitsmlLog2.getNominalHoleSize() |
Value |
WitsmlTrajectory.Station.getNorth()
Return the north of this station.
|
Value |
WitsmlTrajectory.Station.CovarianceMatrix.getNorthEast()
Return the north east of this covariance matrix.
|
Value |
Location.getNorthing() |
Value |
WitsmlTarget.getNorthing()
Return the northing of this target.
|
Value |
WitsmlTrajectory.Station.CovarianceMatrix.getNorthNorth()
Return the north north of this covariance matrix.
|
Value |
WitsmlTarget.getNorthSouthOffset()
Return the north south offset of this target.
|
Value |
WitsmlTarget.getNorthSouthSectionOrigin()
Return the north south section origin of this target.
|
Value |
WitsmlTrajectory.Station.CovarianceMatrix.getNorthVertical()
Return the north vertical of this covariance matrix.
|
Value |
WitsmlTubular.Component.Motor.getNozzleDiameter()
Return the nozzle diameter of this motor.
|
Value |
WitsmlTubular.Component.getNozzleFlowArea()
Return the nozzle flow area of this component.
|
Value |
WitsmlWellbore.getNTargetDays()
Return the n target days of this wellbore.
|
Value |
WitsmlTubular.Component.Sensor.getOffsetBot()
Return the offset from the bottom of the MWD tool for this sensor.
|
Value |
Fluid.getOil() |
Value |
Fluid.getOilOnCuttings() |
Value |
WitsmlTubular.Component.RotarySteerableTool.getOpenPadOuterDiameter() |
Value |
WitsmlTubular.Component.RotarySteerableTool.getOperatingSpeed() |
Value |
WitsmlWell.getOperatorInterestShare()
Return the operator interest share of this well.
|
Value |
WitsmlStimJob.getOrderedHydraulicHorsepower() |
Value |
WitsmlTrajectory.getOriginEw()
Return the east/west origin of this trajectory.
|
Value |
WitsmlWell.Crs.MapProjection.getOriginLatitude()
Return the origin latitude of this map projection.
|
Value |
WitsmlWell.Crs.MapProjection.getOriginLongitude()
Return the origin longitude of this map projection.
|
Value |
WitsmlTrajectory.getOriginNs()
Return the north/south origin of this trajectory.
|
Value |
WitsmlWellboreGeometry.Section.getOuterDiameter() |
Value |
WitsmlTubular.Component.getOuterDiameter()
Return the outer diameter of this component.
|
Value |
WitsmlTubular.Component.Connection.getOuterDiameter()
Return the outer diameter of this connection.
|
Value |
DrillingParameters.getOverPull() |
Value |
WitsmlCementJob.getOverPull()
Return the over pull of this cement job.
|
Value |
WitsmlTubular.Component.RotarySteerableTool.getPadLength() |
Value |
WitsmlTubular.Component.RotarySteerableTool.getPadOffset() |
Value |
WitsmlTubular.Component.RotarySteerableTool.getPadWidth() |
Value |
WitsmlTubular.Component.Bit.getPassThroughDiameter()
Return the pass through diameter of this bit.
|
Value |
WitsmlFormationMarker.getPerpendicularThickness()
Return the perpendicular thickness of this formation marker.
|
Value |
WitsmlWell.Crs.MapProjection.getPerspectiveHeight()
Return the perspective height of this map projection.
|
Value |
WitsmlTubular.Component.Bit.getPilotDiameter()
Return the pilot diameter of this bit.
|
Value |
WitsmlDrillingReport.StatusInfo.getPilotHoleDiameter() |
Value |
WitsmlCementJob.getPipeAverageTorque()
Return the pipe average torque of this cement job.
|
Value |
WitsmlCementJob.getPipeInitialTorque()
Return the pipe initial torque of this cement job.
|
Value |
WitsmlCementJob.getPipeMaxTorque()
Return the pipe max torque of this cement job.
|
Value |
WitsmlCementJob.getPipeReciprocationEndTime()
Return the pipe reciprocation end time of this cement job.
|
Value |
WitsmlCementJob.getPipeReciprocationRate()
Return the pipe reciprocation rate of this cement job.
|
Value |
WitsmlCementJob.getPipeReciprocationStartTime()
Return the pipe reciprocation start time of this cement job.
|
Value |
WitsmlCementJob.getPipeReciprocationStrokeLength()
Return the pipe reciprocation stroke length of this cement job.
|
Value |
WitsmlCementJob.getPipeRotationRate()
Return the pipe rotation rate of this cement job.
|
Value |
WitsmlCementJob.CementTest.getPitFormationBreakdownGradient()
Return the pit formation breakdown gradient of this cement test.
|
Value |
WitsmlBhaRun.getPlannedDls()
Return the planned DLS of this BHA run.
|
Value |
WitsmlCementJob.CementStage.getPlasticMudViscosity()
Return the plastic mud viscosity of this cement stage.
|
Value |
Fluid.getPlasticViscosity() |
Value |
WitsmlSidewallCore.getPlugDiameter()
Return the plug diameter of this sidewall core.
|
Value |
GeologyInterval.getPlugLength() |
Value |
Fluid.getPm() |
Value |
Fluid.getPmFiltrate() |
Value |
Fluid.getPolymer() |
Value |
WitsmlCementJob.CementTest.getPositiveTestEmw()
Return the positive test emw of this cement test.
|
Value |
WitsmlRig.getPotableWaterCapacity() |
Value |
Fluid.getPotassium() |
Value |
WitsmlRigUtilization.getPowerDrawWorks() |
Value |
WitsmlCementJob.CementStage.Fluid.getPowerLawIndex()
Return the power law index of this fluid.
|
Value |
WitsmlDrillingReport.StatusInfo.getPresKickTol() |
Value |
WitsmlDrillingReport.StatusInfo.getPresLotEmw() |
Value |
Fluid.Rheometer.getPressure() |
Value |
WitsmlCementJob.CementTest.getPressure()
Return the pressure of this cement test.
|
Value |
WitsmlTubular.Component.RotarySteerableTool.getPressureDropFactor() |
Value |
DrillingParameters.getPressureDropInBit() |
Value |
WitsmlMudLog.Parameter.getPressureGradient()
Return the pressure gradient of this parameter.
|
Value |
WitsmlTubular.Component.Motor.getPressureLossFact()
Return the pressure loss fact of this motor.
|
Value |
WitsmlRig.Bop.getPressureRating() |
Value |
WitsmlRig.Degasser.getPressureRating() |
Value |
WitsmlRig.SurfaceEquipment.getPressureRating() |
Value |
WitsmlRigUtilization.Bop.getPressureRating() |
Value |
WitsmlRigUtilization.Degasser.getPressureRating() |
Value |
WitsmlRigUtilization.SurfaceEquipment.getPressureRating() |
Value |
WitsmlCementJob.CementStage.getPriorBumpPressure()
Return the prior bump pressure of this cement stage.
|
Value |
WitsmlRig.Pump.getPulsationDampenerPressure() |
Value |
WitsmlRigUtilization.Pump.getPulsationDampenerPressure() |
Value |
WitsmlRig.Pump.getPulsationDampenerVolume() |
Value |
WitsmlRigUtilization.Pump.getPulsationDampenerVolume() |
Value |
WitsmlRig.SurfaceEquipment.getPumpDischargeLineInnerDiameter() |
Value |
WitsmlRigUtilization.SurfaceEquipment.getPumpDischargeLineInnerDiameter() |
Value |
WitsmlRig.SurfaceEquipment.getPumpDischargeLineLength() |
Value |
WitsmlRigUtilization.SurfaceEquipment.getPumpDischargeLineLength() |
Value |
DrillingParameters.getPumpFlowRate() |
Value |
WitsmlCementJob.CementStage.getPumpFlowrateEnd()
Return the pump flowrate end of this cement stage.
|
Value |
WitsmlCementJob.CementStage.getPumpFlowrateStart()
Return the pump flowrate start of this cement stage.
|
Value |
WitsmlTubular.Component.Jar.getPumpOpenForce()
Return the pump open force of this jar.
|
Value |
WitsmlCementJob.CementStage.Fluid.PumpSchedule.getPumpTime()
Return the pump time of this pump schedule.
|
Value |
WitsmlCementJob.CementStage.Fluid.PumpSchedule.getRate()
Return the rate of this pump schedule.
|
Value |
WitsmlRigUtilization.getRatingBlock() |
Value |
WitsmlRigUtilization.getRatingDrawWorks() |
Value |
WitsmlRigUtilization.getRatingHkld() |
Value |
WitsmlRigUtilization.getRatingRotSystem() |
Value |
WitsmlRigUtilization.getRatingSwivel() |
Value |
WitsmlRigUtilization.getRatingTqRotSys() |
Value |
WitsmlTubular.Component.HoleOpener.getReamerDiameter()
Return the reamer diameter of this hole opener.
|
Value |
WitsmlOperationsReport.getReamingTime()
Return the reaming time of this operations report.
|
Value |
DrillingParameters.getReamingTime() |
Value |
WitsmlConventionalCore.getRecoveredLength()
Return the recovered length of this conventional core.
|
Value |
WitsmlConventionalCore.getRecoveryCalculated()
Return the recovery calculated of this conventional core.
|
Value |
WitsmlRig.SurfaceEquipment.getReelLength() |
Value |
WitsmlRigUtilization.SurfaceEquipment.getReelLength() |
Value |
WitsmlRig.SurfaceEquipment.getReelOuterDiameter() |
Value |
WitsmlRigUtilization.SurfaceEquipment.getReelOuterDiameter() |
Value |
WitsmlRig.SurfaceEquipment.getReelWidth() |
Value |
WitsmlRigUtilization.SurfaceEquipment.getReelWidth() |
Value |
WitsmlCementJob.CementStage.Fluid.getReservedVolume()
Return the reserved volume of this fluid.
|
Value |
WitsmlRig.getRiserAngleLimit() |
Value |
WitsmlRigUtilization.getRiserAngleLimit() |
Value |
WitsmlRigUtilization.Pump.getRodInnerDiameter() |
Value |
WitsmlRig.Pump.getRodOuterDiameter() |
Value |
WitsmlRigUtilization.Pump.getRodOuterDiameter() |
Value |
WitsmlDrillingReport.StatusInfo.getRopAv() |
Value |
DrillingParameters.getRopAverage() |
Value |
GeologyInterval.getRopAverage() |
Value |
DrillingParameters.getRopMax() |
Value |
GeologyInterval.getRopMax() |
Value |
DrillingParameters.getRopMin() |
Value |
GeologyInterval.getRopMin() |
Value |
WitsmlOperationsReport.getRotaryDrillingTime()
Return the rotary drilling time of this operations report.
|
Value |
DrillingParameters.getRotaryDrillingTime() |
Value |
WitsmlRig.getRotarySizeOpening() |
Value |
WitsmlRig.getRotatingSystemRating() |
Value |
WitsmlTarget.getRotation()
Return the rotation of this target.
|
Value |
WitsmlRig.getRotationalTorqueRating() |
Value |
WitsmlTubular.Component.Motor.getRotorDiameterAtNozzle()
Return the rotor diameter at nozzle of this motor.
|
Value |
WitsmlRigUtilization.getRotSizeOpening() |
Value |
DrillingParameters.getRpmAverage() |
Value |
DrillingParameters.getRpmAverageDownhole() |
Value |
DrillingParameters.getRpmMax() |
Value |
DrillingParameters.getRpmMin() |
Value |
WitsmlCementJob.CementStage.Fluid.Additive.getSackVolume()
Return the sack volume of this additive.
|
Value |
WitsmlCementJob.CementStage.Fluid.Additive.getSackWeight()
Return the sack weight of this additive.
|
Value |
WitsmlTrajectory.Station.Corrections.getSagAzimuth()
Return the sag azimuth of this corrections.
|
Value |
WitsmlTrajectory.Station.Corrections.getSagInclination()
Return the sag inclination of this corrections.
|
Value |
Fluid.getSand() |
Value |
WitsmlWell.Crs.MapProjection.getScaleFactor()
Return the scale factor of this map projection.
|
Value |
WitsmlWell.Crs.GeodeticModel.getScaleFactor()
Return the scale factor of this geodetic model.
|
Value |
WitsmlTubular.Component.Jar.getSealFrictionForce()
Return the seal friction force of this jar.
|
Value |
WitsmlLog.Curve.getSensorOffset()
Return the sensor offset of this curve.
|
Value |
WitsmlTrajectory.Station.Corrections.getSensorOffset()
Return the sensor offset of this corrections.
|
Value |
WitsmlWellboreGeology.CuttingsIntervalSet.CuttingsInterval.getShaleDensity() |
Value |
GeologyInterval.getShaleDensity() |
Value |
WitsmlCementJob.CementStage.Fluid.PumpSchedule.getShutdownTime()
Return the shutdown time of this pump schedule.
|
Value |
WitsmlRig.Bop.getSize() |
Value |
WitsmlRigUtilization.Bop.getSize() |
Value |
WitsmlRigUtilization.getSizeDrillLine() |
Value |
DrillingParameters.getSlackOff() |
Value |
WitsmlCementJob.getSlackOff()
Return the slack off of this cement job.
|
Value |
DrillingParameters.getslideDrillingTime() |
Value |
WitsmlOperationsReport.getSlideDrillingTime()
Return the slide drilling time of this operations report.
|
Value |
WitsmlCementJob.CementStage.Fluid.getSlurryDensityAtPressure()
Return the slurry density at pressure of this fluid.
|
Value |
WitsmlCementJob.CementStage.Fluid.getSlurryYield()
Return the slurry yield of this fluid.
|
Value |
Fluid.getSolidsContentCalculated() |
Value |
Fluid.getSolidsFromRetort() |
Value |
WitsmlCementJob.CementStage.Fluid.getSolidVolumeFraction()
Return the solid volume fraction of this fluid.
|
Value |
Location.getSouthing() |
Value |
Fluid.Rheometer.Viscosity.getSpeed()
Return the rotational speed of the rheometer.
|
Value |
WitsmlWell.Crs.MapProjection.getSpheroidRadius()
Return the spheroid radius of this map projection.
|
Value |
WitsmlOperationsReport.getSpudTime()
Return the spud time of this operations report.
|
Value |
WitsmlCementJob.CementStage.getSqueezePressure()
Return the squeeze pressure of this cement stage.
|
Value |
WitsmlCementJob.CementStage.getSqueezePressureEnd()
Return the squeeze pressure end of this cement stage.
|
Value |
WitsmlCementJob.getSqueezeTime()
Return the squeeze time of this cement job.
|
Value |
WitsmlWell.Crs.MapProjection.getStandardParallel1()
Return the standard parallel1 of this map projection.
|
Value |
WitsmlWell.Crs.MapProjection.getStandardParallel2()
Return the standard parallel2 of this map projection.
|
Value |
WitsmlRig.SurfaceEquipment.getStandpipeInnerDiameter() |
Value |
WitsmlRigUtilization.SurfaceEquipment.getStandpipeInnerDiameter() |
Value |
WitsmlRig.SurfaceEquipment.getStandpipeLength() |
Value |
WitsmlRigUtilization.SurfaceEquipment.getStandpipeLength() |
Value |
WitsmlRigUtilization.getStartHoleDepth() |
Value |
WitsmlRigUtilization.getStartOperationTime() |
Value |
WitsmlOperationsReport.getStartTime()
Return the start time of this operations report.
|
Value |
WitsmlCementJob.CementStage.getStartTubingPressure()
Return the start tubing pressure of this cement stage.
|
Value |
WitsmlOperationsReport.getSteeringTime()
Return the steering time of this operations report.
|
Value |
DrillingParameters.getSteeringTime() |
Value |
WitsmlLog.getStepIncrement()
Return the step increment of this log.
|
Value |
WitsmlTarget.getStrike()
Return the strike of this target.
|
Value |
WitsmlRig.Pump.getStrokeLength() |
Value |
WitsmlRigUtilization.Pump.getStrokeLength() |
Value |
WitsmlRigUtilization.getStrokeMotionCompensation() |
Value |
Fluid.getSulfide() |
Value |
WitsmlRig.SurfaceEquipment.getSurfaceIronHeight() |
Value |
WitsmlRigUtilization.SurfaceEquipment.getSurfaceIronHeight() |
Value |
WitsmlRig.SurfaceEquipment.getSurfaceIronInnerDiameter() |
Value |
WitsmlRigUtilization.SurfaceEquipment.getSurfaceIronInnerDiameter() |
Value |
WitsmlRig.SurfaceEquipment.getSurfaceIronLength() |
Value |
WitsmlRigUtilization.SurfaceEquipment.getSurfaceIronLength() |
Value |
WitsmlRig.Bop.getSurfLineInnerDiameter() |
Value |
WitsmlRigUtilization.Bop.getSurfLineInnerDiameter() |
Value |
WitsmlRig.Bop.getSurfLineLength() |
Value |
WitsmlRigUtilization.Bop.getSurfLineLength() |
Value |
WitsmlRig.Bop.getSurfLineOuterDiameter() |
Value |
WitsmlRigUtilization.Bop.getSurfLineOuterDiameter() |
Value |
WitsmlRig.SurfaceEquipment.getSwivelInnerDiameter() |
Value |
WitsmlRigUtilization.SurfaceEquipment.getSwivelInnerDiameter() |
Value |
WitsmlRig.SurfaceEquipment.getSwivelLength() |
Value |
WitsmlRigUtilization.SurfaceEquipment.getSwivelLength() |
Value |
WitsmlCementJob.CementStage.getTailPipeDiameter()
Return the tail pipe diameter of this cement stage.
|
Value |
Fluid.Rheometer.getTemperature() |
Value |
WitsmlRig.Degasser.getTemperatureRating() |
Value |
WitsmlRigUtilization.Degasser.getTemperatureRating() |
Value |
WitsmlTubular.Component.getTensionYield()
Return the tension yield of this component.
|
Value |
WitsmlTubular.Component.Connection.getTensionYield()
Return the tension yield of this connection.
|
Value |
WitsmlCementJob.CementStage.Fluid.getThickeningConsistency()
Return the thickening consistency of this fluid.
|
Value |
WitsmlCementJob.CementStage.Fluid.getThickeningPressure()
Return the thickening pressure of this fluid.
|
Value |
WitsmlCementJob.CementStage.Fluid.getThickeningTemperature()
Return the thickening temperature of this fluid.
|
Value |
WitsmlCementJob.CementStage.Fluid.getThickeningTime()
Return the thickening time of this fluid.
|
Value |
WitsmlTarget.getThicknessAbove()
Return the thickness above of this target.
|
Value |
WitsmlTarget.Section.getThicknessAbove()
Return the thickness above of this section.
|
Value |
WitsmlTarget.getThicknessBelow()
Return the thickness below of this target.
|
Value |
WitsmlTarget.Section.getThicknessBelow()
Return the thickness below of this section.
|
Value |
WitsmlTubular.Component.Connection.getThreadSize()
Return the thread size of this connection.
|
Value |
WitsmlCementJob.CementTest.getTimeBeforeLinerTopTest()
Return the time before liner top test of this cement test.
|
Value |
WitsmlCementJob.CementTest.getTimeBetweenCementAndLogging()
Return the time between cement and logging of this cement test.
|
Value |
WitsmlCementJob.CementTest.getTimeBetweenCementAndPit()
Return the time between cement and pit of this cement test.
|
Value |
WitsmlRealtime.Header.Interval.getTimeInterval()
Return the time interval of this interval.
|
Value |
WitsmlOperationsReport.getTimeOnLocation()
Return the time on location of this operations report.
|
Value |
WitsmlCementJob.CementStage.getTimePressureHeld()
Return the time pressure held of this cement stage.
|
Value |
WitsmlTrajectory.Station.getToolfaceGravityAngle()
Return the toolface gravity angle of this station.
|
Value |
WitsmlTrajectory.Station.getToolfaceMagneticAngle()
Return the toolface magnetic angle of this station.
|
Value |
WitsmlTubular.Component.Motor.getToolOffset()
Return the tool offset of this motor.
|
Value |
WitsmlSidewallCore.getToolReferenceMd()
Return the tool reference MD of this sidewall core.
|
Value |
WitsmlRig.SurfaceEquipment.getTopStackHeight() |
Value |
WitsmlRigUtilization.SurfaceEquipment.getTopStackHeight() |
Value |
WitsmlRig.SurfaceEquipment.getTopStackInnerDiameter() |
Value |
WitsmlRigUtilization.SurfaceEquipment.getTopStackInnerDiameter() |
Value |
WitsmlTubular.Component.getTorqueYield()
Return the torque yield of this component.
|
Value |
WitsmlTubular.Component.Connection.getTorqueYield()
Return the torque yield of this connection.
|
Value |
WitsmlTubular.Component.getTorsionalStiffness()
Return the torsional stiffness of this component.
|
Value |
Fluid.getTotalCalciumHardness() |
Value |
WitsmlTrajectory.Station.Validations.getTotalGeomagneticField()
Return the total geomagnetic field of this validations.
|
Value |
WitsmlTrajectory.Station.Validations.getTotalGravitationalField()
Return the total gravitational field of this validations.
|
Value |
WitsmlStimJob.getTotalJobVolume() |
Value |
WitsmlStimJob.getTotalProppantInFormation() |
Value |
WitsmlStimJob.getTotalProppantUsed() |
Value |
WitsmlStimJob.getTotalPumpTime() |
Value |
WitsmlCementJob.CementStage.Fluid.getTotalSlurryVolume()
Return the total slurry volume of this fluid.
|
Value |
WitsmlStimJob.getTreatingBottomHoleTemperature() |
Value |
WitsmlWell.Crs.MapProjection.getTrueScaleLatitude()
Return the true scale latitude of this map projection.
|
Value |
WitsmlTrajectory.Station.getTurnRate()
Return the turn rate of this station.
|
Value |
WitsmlWellboreMarker.getTvd() |
Value |
WitsmlOperationsReport.getTvd()
Return the TVD of this operations report.
|
Value |
WitsmlDrillingReport.StatusInfo.getTvd() |
Value |
WitsmlTarget.getTvd()
Return the TVD of this target.
|
Value |
WitsmlTrajectory.Station.getTvd()
Return the TVD of this station.
|
Value |
WitsmlFluidsReport.getTvd()
Return the TVD of this fluids report.
|
Value |
WitsmlWellbore.getTvdBitCurrent()
Return the TVD bit current of this wellbore.
|
Value |
WitsmlWellboreGeometry.Section.getTvdBottom() |
Value |
GeologyInterval.getTvdBottom() |
Value |
WitsmlWellbore.getTvdCurrent()
Return the TVD current of this wellbore.
|
Value |
WitsmlRisk.getTvdEnd()
Return the TVD end of this risk.
|
Value |
WitsmlDrillingReport.StatusInfo.getTvdFormationStrength() |
Value |
WitsmlWellbore.getTvdKickoff()
Return the TVD kickoff of this wellbore.
|
Value |
WitsmlDrillingReport.StatusInfo.getTvdKickoff() |
Value |
WitsmlDrillingReport.StatusInfo.getTvdLastCasingDiameter() |
Value |
WitsmlFormationMarker.getTvdLogSample()
Return the TVD log sample of this formation marker.
|
Value |
WitsmlDrillingReport.StatusInfo.getTvdLot() |
Value |
WitsmlDrillingReport.StatusInfo.getTvdPilotHolePlanned() |
Value |
WitsmlWellbore.getTvdPlanned()
Return the TVD planned of this wellbore.
|
Value |
WitsmlFormationMarker.getTvdPrognosed()
Return the TVD prognosed of this formation marker.
|
Value |
WitsmlCementJob.getTvdShoe()
Return the TVD shoe of this cement job.
|
Value |
WitsmlRisk.getTvdStart()
Return the TVD start of this risk.
|
Value |
WitsmlCementJob.getTvdStringShoe()
Return the TVD string shoe of this cement job.
|
Value |
WitsmlWellbore.getTvdSubSeaPlanned()
Return the TVD sub sea planned of this wellbore.
|
Value |
WitsmlWellboreGeometry.Section.getTvdTop() |
Value |
GeologyInterval.getTvdTop() |
Value |
WitsmlFormationMarker.getTvdTopSample()
Return the TVD top sample of this formation marker.
|
Value |
WitsmlRig.SurfaceEquipment.getUmbilicalLength() |
Value |
WitsmlRigUtilization.SurfaceEquipment.getUmbilicalLength() |
Value |
WitsmlRig.SurfaceEquipment.getUmbilicalOuterDiameter() |
Value |
WitsmlRigUtilization.SurfaceEquipment.getUmbilicalOuterDiameter() |
Value |
WitsmlStimJob.StimJobMaterialCatalog.StimProppantAgent.getUnconfinedCompressiveStrength() |
Value |
WitsmlTubular.Component.Jar.getUpSetForce()
Return the up set force of this jar.
|
Value |
WitsmlTubular.Component.Jar.getUpTripForce()
Return the up trip force of this jar.
|
Value |
WitsmlStimJob.getUsedHydraulicHorsepower() |
Value |
WitsmlToolErrorModel.IscwsaErrorTermValue.getValue() |
Value |
WitsmlRigUtilization.getVarDeckLdMx() |
Value |
WitsmlRig.getVariableDeckLoadStormRating() |
Value |
WitsmlRigUtilization.getVdlStorm() |
Value |
WitsmlRig.Degasser.getVentLineInnerDiameter() |
Value |
WitsmlRigUtilization.Degasser.getVentLineInnerDiameter() |
Value |
WitsmlRig.Degasser.getVentLineLength() |
Value |
WitsmlRigUtilization.Degasser.getVentLineLength() |
Value |
WitsmlTrajectory.Station.getVerticalSectionDistance()
Return the vertical section distance of this station.
|
Value |
WitsmlTrajectory.Station.CovarianceMatrix.getVerticalVertical()
Return the vertical vertical of this covariance matrix.
|
Value |
Fluid.Rheometer.getViscosimeter100rpm() |
Value |
Fluid.Rheometer.getViscosimeter200rpm() |
Value |
Fluid.Rheometer.getViscosimeter300rpm() |
Value |
Fluid.Rheometer.getViscosimeter3rpm() |
Value |
Fluid.Rheometer.getViscosimeter600rpm() |
Value |
Fluid.Rheometer.getViscosimeter6rpm() |
Value |
Fluid.Rheometer.Viscosity.getViscosity()
Return the raw reading from a rheometer.
|
Value |
WitsmlCementJob.CementStage.Fluid.getViscosity()
Return the viscosity of this fluid.
|
Value |
WitsmlDrillingReport.StatusInfo.getVolKickTol() |
Value |
WitsmlCementJob.CementStage.Fluid.PumpSchedule.getVolume()
Return the volume of this pump schedule.
|
Value |
WitsmlCementJob.CementStage.getVolumeInsideCasing()
Return the volume inside casing of this cement stage.
|
Value |
WitsmlCementJob.CementStage.getVolumeOfReturns()
Return the volume of returns of this cement stage.
|
Value |
WitsmlCementJob.CementStage.Fluid.getVolumeOther()
Return the volume other of this fluid.
|
Value |
WitsmlCementJob.CementStage.getVolumeOutsideCasing()
Return the volume outside casing of this cement stage.
|
Value |
WitsmlCementJob.CementStage.Fluid.getVolumePumped()
Return the volume pumped of this fluid.
|
Value |
WitsmlCementJob.getWaitingOnCementTime()
Return the waiting on cement time of this cement job.
|
Value |
WitsmlTubular.Component.getWallThickness()
Return the wall thickness of this component.
|
Value |
WitsmlTubular.Component.getWallWear()
Return the wall wear of this component.
|
Value |
Fluid.getWater() |
Value |
WitsmlWellboreGeometry.getWaterDepth() |
Value |
WitsmlWell.getWaterDepth()
Return the water depth of this well.
|
Value |
WitsmlRig.getWaterDepthRating() |
Value |
WitsmlCementJob.CementStage.Fluid.getWaterMixRatio()
Return the water mix ratio of this fluid.
|
Value |
WitsmlCementJob.CementStage.Fluid.getWaterVolume()
Return the water volume of this fluid.
|
Value |
DrillingParameters.getWeightAboveJar() |
Value |
DrillingParameters.getWeightBelowJar() |
Value |
WitsmlWellboreGeometry.Section.getWeightPerLength() |
Value |
WitsmlWell.getWellHeadElevation()
Return the well head elevation of this well.
|
Value |
Location.getWesting() |
Value |
DrillingParameters.getWobAverage() |
Value |
DrillingParameters.getWobAverageDownhole() |
Value |
DrillingParameters.getWobMax() |
Value |
DrillingParameters.getWobMin() |
Value |
WitsmlRig.Bop.getWorkingPressure() |
Value |
WitsmlRig.Bop.Component.getWorkingPressure() |
Value |
WitsmlRigUtilization.Bop.getWorkingPressure() |
Value |
WitsmlRigUtilization.Bop.Component.getWorkingPressure() |
Value |
WitsmlRigUtilization.getWtBlock() |
Value |
Location.getX() |
Value |
Location.getXLocal() |
Value |
WitsmlWell.Crs.GeodeticModel.getXRotation()
Return the x rotation of this geodetic model.
|
Value |
WitsmlWell.Crs.GeodeticModel.getXTranslation()
Return the x translation of this geodetic model.
|
Value |
Location.getY() |
Value |
WitsmlWell.Crs.LocalCrs.getYAxisAzimuth()
Return the y axis azimuth of this local crs.
|
Value |
Fluid.getYieldPoint() |
Value |
WitsmlCementJob.CementStage.Fluid.getYieldPoint()
Return the yield point of this fluid.
|
Value |
WitsmlCementJob.CementStage.getYieldPointMud()
Return the yield point mud of this cement stage.
|
Value |
Location.getYLocal() |
Value |
WitsmlWell.Crs.GeodeticModel.getYRotation()
Return the y rotation of this geodetic model.
|
Value |
WitsmlWell.Crs.GeodeticModel.getYTranslation()
Return the y translation of this geodetic model.
|
Value |
WitsmlWell.Crs.GeodeticModel.getZRotation()
Return the z rotation of this geodetic model.
|
Value |
WitsmlWell.Crs.GeodeticModel.getZTranslation()
Return the z translation of this geodetic model.
|
Modifier and Type | Method and Description |
---|---|
void |
Lithology.Qualifier.setAbundance(Value abundance) |
void |
WitsmlRig.Bop.setAccumulatorFluidCapacity(Value accumulatorFluidCapacity) |
void |
WitsmlRigUtilization.Bop.setAccumulatorFluidCapacity(Value accumulatorFluidCapacity) |
void |
WitsmlRig.Bop.setAccumulatorOperatingPressure(Value accumulatorOperatingPressure) |
void |
WitsmlRigUtilization.Bop.setAccumulatorOperatingPressure(Value accumulatorOperatingPressure) |
void |
WitsmlRig.Bop.setAccumulatorPreChargePressure(Value accumulatorPreChargePressure) |
void |
WitsmlRigUtilization.Bop.setAccumulatorPreChargePressure(Value accumulatorPreChargePressure) |
void |
WitsmlRig.Bop.setAccumulatorPreChargeVolume(Value accumulatorPreChargeVolume) |
void |
WitsmlRigUtilization.Bop.setAccumulatorPreChargeVolume(Value accumulatorPreChargeVolume) |
void |
GeologyInterval.Chromatograph.setAcetylene(Value acetylene) |
void |
WitsmlBhaRun.setActualDls(Value actualDls)
Set the actual DLS of this BHA run.
|
void |
WitsmlCementJob.CementStage.Fluid.Additive.setAdditiveAmount(Value additiveAmount)
Set the additive amount of this additive.
|
void |
WitsmlRig.setairGap(Value airGap) |
void |
WitsmlWellboreGeometry.setAirGap(Value airGap) |
void |
WitsmlRigUtilization.setAirGap(Value airGap) |
void |
Fluid.setAlkalinityP1(Value alkalinityP1) |
void |
Fluid.setAlkalinityP2(Value alkalinityP2) |
void |
WitsmlTubular.Component.Bend.setAngle(Value angle)
Set the angle of this bend.
|
void |
WitsmlTarget.Section.setAngle(Value angle)
Set the angle of this section.
|
void |
WitsmlCementJob.CementStage.Fluid.setApiFluidLossVolume(Value apiFluidLossVolume)
Set the api fluid loss volume of this fluid.
|
void |
WitsmlFormationMarker.setApparentThickness(Value apparentThickness)
Set the apparent thickness of this formation marker.
|
void |
Fluid.setAsg(Value asg) |
void |
GeologyInterval.Chromatograph.setAverageCO2(Value averageCO2) |
void |
GeologyInterval.MudGas.setAverageConnectionGas(Value averageConnectionGas) |
void |
WitsmlCementJob.CementStage.setAverageDisplacementRate(Value averageDisplacementRate)
Set the average displacement rate of this cement stage.
|
void |
GeologyInterval.setAverageDrillingExponent(Value averageDrillingExponent) |
void |
GeologyInterval.setAverageEffectiveCirculatingDensity(Value averageEffectiveCirculatingDensity) |
void |
GeologyInterval.Chromatograph.setAverageEthane(Value averageEthane) |
void |
GeologyInterval.Chromatograph.setAverageH2S(Value averageH2S) |
void |
GeologyInterval.Chromatograph.setAverageIsoButane(Value averageIsoButane) |
void |
GeologyInterval.Chromatograph.setAverageIsoHexane(Value averageIsoHexane) |
void |
GeologyInterval.Chromatograph.setAverageIsoPentane(Value averageIsoPentane) |
void |
WitsmlTubular.Component.setAverageJointLength(Value averageJointLength)
Set the average join length of this component.
|
void |
GeologyInterval.Chromatograph.setAverageMethane(Value averageMethane) |
void |
GeologyInterval.setAverageMudWeight(Value averageMudWeight) |
void |
GeologyInterval.Chromatograph.setAverageNeoPentane(Value averageNeoPentane) |
void |
GeologyInterval.Chromatograph.setAverageNorButane(Value averageNorButane) |
void |
GeologyInterval.Chromatograph.setAverageNorHexane(Value averageNorHexane) |
void |
GeologyInterval.Chromatograph.setAverageNorPentane(Value averageNorPentane) |
void |
WitsmlStimJob.setAveragePressure(Value averagePressure) |
void |
GeologyInterval.Chromatograph.setAveragePropane(Value averagePropane) |
void |
DrillingParameters.setAveragePumpPressure(Value averagePumpPressure) |
void |
WitsmlOperationsReport.setAverageRop(Value averageRop)
Set the average rop of this operations report.
|
void |
GeologyInterval.setAverageRpm(Value averageRpm) |
void |
WitsmlCementJob.CementStage.setAverageSqueezeFlowrate(Value averageSqueezeFlowrate)
Set the average squeeze flowrate of this cement stage.
|
void |
WitsmlCementJob.CementStage.setAverageSqueezePressure(Value averageSqueezePressure)
Set the average squeeze pressure of this cement stage.
|
void |
GeologyInterval.setAverageTorque(Value averageTorque) |
void |
DrillingParameters.setAverageTorqueDownhole(Value averageTorqueDownhole) |
void |
DrillingParameters.setAverageTorqueOffBottom(Value averageTorqueOffBottom) |
void |
DrillingParameters.setAverageTorqueOnBottom(Value averageTorqueOnBottom) |
void |
GeologyInterval.MudGas.setAverageTotalGas(Value averageTotalGas) |
void |
GeologyInterval.setAverageWob(Value averageWob) |
void |
WitsmlTrajectory.Station.Corrections.setAxialMagneticDrillstring(Value axialMagneticDrillstring)
Set the axial magnetic drillstring of this corrections.
|
void |
WitsmlTubular.Component.setAxialStiffness(Value axialStiffness)
Set the axial stiffness of this component.
|
void |
WitsmlTrajectory.Station.setAzimuth(Value azimuth)
Set the azimuth of this station.
|
void |
DrillingParameters.setAzimuthBottom(Value azimuthBottom) |
void |
WitsmlTrajectory.setAzimuthOfVerticalSection(Value azimuthOfVerticalSection)
Set the azimuth of vertical section of this trajectory.
|
void |
DrillingParameters.setAzimuthTop(Value azimuthTop) |
void |
WitsmlCementJob.CementStage.setBackPressure(Value backPressure)
Set the back pressure of this cement stage.
|
void |
WitsmlCementJob.CementStage.Fluid.PumpSchedule.setBackPressure(Value backPressure)
Set the back pressure of this pump schedule.
|
void |
Fluid.setBarite(Value barite) |
void |
WitsmlConventionalCore.setBarrelLength(Value barrelLength)
Set the barrel length of this conventional core.
|
void |
WitsmlCementJob.CementStage.Fluid.setBaseFluidDensity(Value baseFluidDensity)
Set the base fluid density of this fluid.
|
void |
WitsmlWell.Crs.MapProjection.setBearing(Value bearing)
Set the bearing of this map projection.
|
void |
WitsmlTubular.Component.Motor.setBearingBoxClearance(Value bearingBoxClearance)
Set the bearing box clearance of this motor.
|
void |
WitsmlFormationMarker.setBedThickness(Value bedThickness)
Set the bed thickness of this formation marker.
|
void |
WitsmlTubular.Component.Bend.setBendBottomDistance(Value bendBottomDistance)
Set the bend bottom distance of this bend.
|
void |
WitsmlTubular.Component.setBendStiffness(Value bendStiffness)
Set the bend stiffness of this component.
|
void |
WitsmlTrajectory.Station.CovarianceMatrix.setBiasEast(Value biasEast)
Set the bias east of this covariance matrix.
|
void |
WitsmlTrajectory.Station.CovarianceMatrix.setBiasNorth(Value biasNorth)
Set the bias north of this covariance matrix.
|
void |
WitsmlTrajectory.Station.CovarianceMatrix.setBiasVertical(Value biasVertical)
Set the bias vertical of this covariance matrix.
|
void |
WitsmlConventionalCore.setBitDiameter(Value bitDiameter)
Set the bit diameter of this conventional core.
|
void |
WitsmlTubular.Component.Bit.setBitDiameter(Value bitDiameter)
Set the bit diameter of this bit.
|
void |
DrillingParameters.setBitHydraulic(Value bitHydraulic) |
void |
WitsmlRisk.setBitMdEnd(Value bitMdEnd)
Set the bit MD end of this risk.
|
void |
WitsmlRisk.setBitMdStart(Value bitMdStart)
Set the bit MD start of this risk.
|
void |
DrillingParameters.setBitNozzleAverageVelocity(Value bitNozzleAverageVelocity) |
void |
DrillingParameters.setBitOperatingTime(Value bitOperatingTime) |
void |
WitsmlTubular.Component.Stabilizer.setBladeBottomDistance(Value bladeBottomDistance)
Set the blade bottom distance of this stabilizer.
|
void |
WitsmlTubular.Component.Stabilizer.setBladeLength(Value bladeLength)
Set the blade length of this stabilizer.
|
void |
WitsmlRig.setBlockRating(Value blockRating) |
void |
WitsmlRig.setBlockWeight(Value blockWeight) |
void |
WitsmlRig.Degasser.setBlowdownCapacity(Value blowdownCapacity) |
void |
WitsmlRigUtilization.Degasser.setBlowdownCapacity(Value blowdownCapacity) |
void |
WitsmlRig.Bop.setBoosterLineInnerDiameter(Value boosterLineInnerDiameter) |
void |
WitsmlRigUtilization.Bop.setBoosterLineInnerDiameter(Value boosterLineInnerDiameter) |
void |
WitsmlRig.Bop.setBoosterLineLength(Value boosterLineLength) |
void |
WitsmlRigUtilization.Bop.setBoosterLineLength(Value boosterLineLength) |
void |
WitsmlRig.Bop.setBoosterLineOuterDiameter(Value boosterLineOuterDiameter) |
void |
WitsmlRigUtilization.Bop.setBoosterLineOuterDiameter(Value boosterLineOuterDiameter) |
void |
WitsmlCementJob.CementStage.setBottomHoleCirculatingTemperature(Value bottomHoleCirculatingTemperature)
Set the bottom hole circulating temperature of this cement stage.
|
void |
WitsmlCementJob.CementStage.setBottomHoleStaticTemperature(Value bottomHoleStaticTemperature)
Set the bottom hole static temperature of this cement stage.
|
void |
WitsmlStimJob.setBottomStaticTemperature(Value bottomStaticTemperature) |
void |
WitsmlRig.setBrakeDescription(Value brakeDescription) |
void |
WitsmlCementJob.CementStage.setBreakdownFlowrate(Value breakdownFlowrate)
Set the breakdown flowrate of this cement stage.
|
void |
WitsmlCementJob.CementStage.setBreakdownPressure(Value breakdownPressure)
Set the breakdown pressure of this cement stage.
|
void |
Fluid.setBrine(Value brine) |
void |
WitsmlTrajectory.Station.setBuildRate(Value buildRate)
Set the build rate of this station.
|
void |
WitsmlRig.setBulkCementCapacity(Value bulkCementCapacity) |
void |
WitsmlWellboreGeology.CuttingsIntervalSet.CuttingsInterval.setBulkDensity(Value bulkDensity) |
void |
GeologyInterval.setBulkDensity(Value bulkDensity) |
void |
WitsmlRig.setBulkMudStorageCapacity(Value bulkMudStorageCapacity) |
void |
WitsmlCementJob.CementStage.setBumpPressure(Value bumpPressure)
Set the bump pressure of this cement stage.
|
void |
WitsmlTubular.Component.setBurstPressure(Value burstPressure)
Set the burst pressure of this component.
|
void |
WitsmlWellboreGeology.CuttingsIntervalSet.CuttingsInterval.setCalcimetry(Value calcimetry) |
void |
GeologyInterval.setCalcimetry(Value calcimetry) |
void |
WitsmlWellboreGeology.CuttingsIntervalSet.CuttingsInterval.setCalcite(Value calcite) |
void |
GeologyInterval.setCalcite(Value calcite) |
void |
Fluid.setCalcium(Value calcium) |
void |
Fluid.setCalciumChloride(Value calciumChloride) |
void |
WitsmlRigUtilization.setCapBulkCement(Value capBulkCement) |
void |
WitsmlRigUtilization.setCapBulkMud(Value capBulkMud) |
void |
WitsmlRigUtilization.setCapDrillWater(Value capDrillWater) |
void |
WitsmlRigUtilization.setCapFuel(Value capFuel) |
void |
WitsmlRigUtilization.setCapLiquidMud(Value capLiquidMud) |
void |
WitsmlRigUtilization.setCapPotableWater(Value capPotableWater) |
void |
WitsmlOperationsReport.setCasingDiameter(Value casingDiameter)
Set the casing diameter of this operations report.
|
void |
WitsmlOperationsReport.setCasingMd(Value casingMd)
Set the casing MD of this operations report.
|
void |
WitsmlCementJob.CementStage.setCasingPressureEnd(Value casingPressureEnd)
Set the casing pressure end of this cement stage.
|
void |
WitsmlCementJob.CementStage.setCasingPressureStart(Value casingPressureStart)
Set the casing pressure start of this cement stage.
|
void |
WitsmlOperationsReport.setCasingTvd(Value casingTvd)
Set the casing TVD of this operations report.
|
void |
WitsmlCementJob.CementTest.setCementBondLogPressure(Value cementBondLogPressure)
Set the cement bond log pressure of this cement test.
|
void |
WitsmlCementJob.CementStage.Fluid.setCementVolume(Value cementVolume)
Set the cement volume of this fluid.
|
void |
WitsmlWell.Crs.MapProjection.setCentralMeridian(Value centralMeridian)
Set the central meridian of this map projection.
|
void |
Fluid.setChloride(Value chloride) |
void |
Fluid.setChlorideCorrectedSolids(Value chlorideCorrectedSolids) |
void |
WitsmlRig.Bop.setChokeLineInnerDiameter(Value chokeLineInnerDiameter) |
void |
WitsmlRigUtilization.Bop.setChokeLineInnerDiameter(Value chokeLineInnerDiameter) |
void |
WitsmlRig.Bop.setChokeLineLength(Value chokeLineLength) |
void |
WitsmlRigUtilization.Bop.setChokeLineLength(Value chokeLineLength) |
void |
WitsmlRig.Bop.setChokeLineOuterDiameter(Value chokeLineOuterDiameter) |
void |
WitsmlRigUtilization.Bop.setChokeLineOuterDiameter(Value chokeLineOuterDiameter) |
void |
WitsmlRig.Bop.setChokeManifoldPressure(Value chokeManifoldPressure) |
void |
WitsmlRigUtilization.Bop.setChokeManifoldPressure(Value chokeManifoldPressure) |
void |
WitsmlCementJob.CementStage.setCirculateVolumeStart(Value circulateVolumeStart)
Set the circulate volume start of this cement stage.
|
void |
WitsmlOperationsReport.setCirculatingTime(Value circulatingTime)
Set the circulating time of this operations report.
|
void |
DrillingParameters.setCirculationTime(Value circulationTime) |
void |
WitsmlTubular.Component.RotarySteerableTool.setClosedPadOuterDiameter(Value closedPadOuterDiameter) |
void |
WitsmlTubular.Component.setCollapsePressure(Value collapsePressure)
Set the collapse pressure of this component.
|
void |
WitsmlCementJob.CementStage.Fluid.setCompressiveStrengthPressure1(Value compressiveStrengthPressure1)
Set the compressive strength pressure1 of this fluid.
|
void |
WitsmlCementJob.CementStage.Fluid.setCompressiveStrengthPressure2(Value compressiveStrengthPressure2)
Set the compressive strength pressure2 of this fluid.
|
void |
WitsmlCementJob.CementStage.Fluid.setCompressiveStrengthTemperature1(Value compressiveStrengthTemperature1)
Set the compressive strength temperature1 of this fluid.
|
void |
WitsmlCementJob.CementStage.Fluid.setCompressiveStrengthTemperature2(Value compressiveStrengthTemperature2)
Set the compressive strength temperature2 of this fluid.
|
void |
WitsmlCementJob.CementStage.Fluid.setCompressiveStrengthTime1(Value compressiveStrengthTime1)
Set the compressive strength time1 of this fluid.
|
void |
WitsmlCementJob.CementStage.Fluid.setCompressiveStrengthTime2(Value compressiveStrengthTime2)
Set the compressive strength time2 of this fluid.
|
void |
WitsmlMudLog.Parameter.setConcentration(Value concentration)
Set the concentration of this parameter.
|
void |
WitsmlCementJob.CementStage.Fluid.Additive.setConcentration(Value concentration)
Set the concentration of this additive.
|
void |
WitsmlRig.Bop.setConnectionSize(Value connectionSize) |
void |
WitsmlRigUtilization.Bop.setConnectionSize(Value connectionSize) |
void |
WitsmlCementJob.CementStage.Fluid.setConsistencyIndex(Value consistencyIndex)
Set the consistency index of this fluid.
|
void |
WitsmlCementJob.CementStage.Fluid.setConstantGasDensity(Value constantGasDensity)
Set the constant gas density of this fluid.
|
void |
WitsmlCementJob.CementStage.Fluid.setConstantGasFoamDensity(Value constantGasFoamDensity)
Set the constant gas foam density of this fluid.
|
void |
WitsmlCementJob.CementStage.Fluid.setConstantGasRatioAverage(Value constantGasRatioAverage)
Set the constant gas ratio average of this fluid.
|
void |
WitsmlCementJob.CementStage.Fluid.setConstantGasRatioEnd(Value constantGasRatioEnd)
Set the constant gas ratio end of this fluid.
|
void |
WitsmlCementJob.CementStage.Fluid.setConstantGasRatioStart(Value constantGasRatioStart)
Set the constant gas ratio start of this fluid.
|
void |
WitsmlSidewallCore.setCoreMd(Value coreMd)
Set the core MD of this sidewall core.
|
void |
WitsmlRig.SurfaceEquipment.setCoreOuterDiameter(Value coreOuterDiameter) |
void |
WitsmlRigUtilization.SurfaceEquipment.setCoreOuterDiameter(Value coreOuterDiameter) |
void |
WitsmlTubular.Component.Bit.setCost(Value cost)
Set the cost of this bit.
|
void |
WitsmlDrillingReport.StatusInfo.setCostDay(Value costDay) |
void |
WitsmlDrillingReport.StatusInfo.setCostDayMud(Value costDayMud) |
void |
WitsmlTubular.Component.Connection.setCriticalCrossSection(Value criticalCrossSection)
Set the critical cross section of this connection.
|
void |
WitsmlTrajectory.Station.Corrections.setCrossAcialMagneticDrillstring(Value crossAcialMagneticDrillstring)
Set the cross acial magnetic drillstring of this corrections.
|
void |
WitsmlTrajectory.Station.Corrections.setCrossAcialMagneticDrillstring2(Value crossAcialMagneticDrillstring2)
Set the cross acial magnetic drillstring2 of this corrections.
|
void |
WitsmlCementJob.CementStage.setCtuPressureEnd(Value ctuPressureEnd)
Set the ctu pressure end of this cement stage.
|
void |
WitsmlCementJob.CementStage.setCtuPressureStart(Value ctuPressureStart)
Set the ctu pressure start of this cement stage.
|
void |
WitsmlOperationsReport.setCurrentRop(Value currentRop)
Set the current rop of this operations report.
|
void |
WitsmlDrillingReport.StatusInfo.setCurrentRop(Value rop) |
void |
WitsmlConventionalCore.setCutDiameter(Value cutDiameter)
Set the cut diameter of this conventional core.
|
void |
WitsmlWellboreGeology.CuttingsIntervalSet.CuttingsInterval.setCuttingsCationicExchangeCapacity(Value cuttingsCationicExchangeCapacity) |
void |
GeologyInterval.setCuttingsCationicExchangeCapacity(Value cuttingsCationicExchangeCapacity) |
void |
GeologyInterval.Chromatograph.setCycleTime(Value cycleTime) |
void |
WitsmlRealtime.Channel.setDataDensity(Value dataDensity)
Set the data density of this channel.
|
void |
WitsmlLog.Curve.setDataDensity(Value dataDensity)
Set the data density of this curve.
|
void |
Fluid.setDensity(Value density) |
void |
WitsmlCementJob.CementStage.Fluid.setDensity(Value density)
Set the density of this fluid.
|
void |
WitsmlCementJob.CementStage.Fluid.Additive.setDensity(Value density)
Set the density of this additive.
|
void |
WitsmlRig.setDerrickHeight(Value derrickHeight) |
void |
WitsmlRig.setDerrickWindCapacity(Value derrickWindCapacity) |
void |
WitsmlDrillingReport.StatusInfo.setDiaHole(Value diaHole) |
void |
WitsmlTubular.Component.Nozzle.setDiameter(Value diameter)
Set the diameter of this nozzle.
|
void |
WitsmlFormationMarker.setDip(Value dip)
Set the dip of this formation marker.
|
void |
WitsmlTarget.setDip(Value dip)
Set the dip of this target.
|
void |
WitsmlWellboreMarker.setDipAngle(Value dipAngle) |
void |
WitsmlTrajectory.Station.setDipAngleUncertainty(Value dipAngleUncertainty)
Set the dip angle uncertainty of this station.
|
void |
WitsmlFormationMarker.setDipDirection(Value dipDirection)
Set the dip direction of this formation marker.
|
void |
WitsmlWellboreMarker.setDipDirection(Value dipDirection) |
void |
WitsmlTubular.Component.setDisplacement(Value displacement)
Set the displacement of this component.
|
void |
WitsmlRig.Pump.setDisplacement(Value displacement) |
void |
WitsmlRigUtilization.Pump.setDisplacement(Value displacement) |
void |
WitsmlCementJob.CementStage.setDisplacementFluidDensity(Value displacementFluidDensity)
Set the displacement fluid density of this cement stage.
|
void |
WitsmlCementJob.CementStage.setDisplacementFluidVolume(Value displacementFluidVolume)
Set the displacement fluid volume of this cement stage.
|
void |
WitsmlCementJob.CementStage.setDisplacementPressure(Value displacementPressure)
Set the displacement pressure of this cement stage.
|
void |
WitsmlOperationsReport.setDistanceDrilled(Value distanceDrilled)
Set the distance drilled of this operations report.
|
void |
WitsmlDrillingReport.StatusInfo.setDistanceDrilled(Value distanceDrilled) |
void |
WitsmlOperationsReport.setDistanceDrilledRotating(Value distanceDrilledRotating)
Set the distance drilled rotating of this operations report.
|
void |
DrillingParameters.setDistanceDrilledRotating(Value distanceDrilledRotating) |
void |
WitsmlOperationsReport.setDistanceDrilledSliding(Value distanceDrilledSliding)
Set the distance drilled sliding of this operations report.
|
void |
DrillingParameters.setDistanceDrilledSliding(Value distanceDrilledSliding) |
void |
WitsmlOperationsReport.setDistanceHold(Value distanceHold)
Set the distance hold of this operations report.
|
void |
DrillingParameters.setDistanceHold(Value distanceHold) |
void |
WitsmlRealtime.Header.Interval.setDistanceInterval(Value distanceInterval)
Set the distance interval of this interval.
|
void |
WitsmlOperationsReport.setDistanceReamed(Value distanceReamed)
Set the distance reamed of this operations report.
|
void |
DrillingParameters.setDistanceReamed(Value distanceReamed) |
void |
WitsmlOperationsReport.setDistanceSteering(Value distanceSteering)
Set the distance steering of this operations report.
|
void |
DrillingParameters.setDistanceSteering(Value distanceSteering) |
void |
WitsmlCementJob.CementTest.setDistanceToTopOfLiner(Value distanceToTopOfLiner)
Set the distance to top of liner of this cement test.
|
void |
WitsmlDrillingReport.StatusInfo.setDistDrillRot(Value distDrillRot) |
void |
WitsmlDrillingReport.StatusInfo.setDistDrillSlid(Value distDrillSlid) |
void |
WitsmlDrillingReport.StatusInfo.setDistHold(Value distHold) |
void |
WitsmlDrillingReport.StatusInfo.setDistReam(Value distReam) |
void |
WitsmlDrillingReport.StatusInfo.setDistSteering(Value distSteering) |
void |
WitsmlTrajectory.Station.setDls(Value dls)
Set the DLS of this station.
|
void |
WitsmlTrajectory.Station.setDMd(Value dMd)
Set the d MD of this station.
|
void |
WitsmlWellboreGeology.CuttingsIntervalSet.CuttingsInterval.setDolomite(Value dolomite) |
void |
GeologyInterval.setDolomite(Value dolomite) |
void |
WitsmlTubular.Component.Jar.setDownSetForce(Value downSetForce)
Set the down set force of this jar.
|
void |
WitsmlTubular.Component.Jar.setDownTripForce(Value downTripForce)
Set the down trip force of this jar.
|
void |
WitsmlRig.setDrawWorksPower(Value drawWorksPower) |
void |
WitsmlRig.setDrawWorksRating(Value drawWorksRating) |
void |
WitsmlRig.setDrillDepthRating(Value drillDepthRating) |
void |
WitsmlRig.setDrillingDatumToPermanentDatumDistance(Value drillingDatumToPermanentDatumDistance) |
void |
WitsmlOperationsReport.setDrillingTime(Value drillingTime)
Set the drilling time of this operations report.
|
void |
WitsmlRig.setDrillLineDiameter(Value drillLineDiameter) |
void |
WitsmlRig.setDrillWaterCapacity(Value drillWaterCapacity) |
void |
WitsmlCementJob.CementStage.Fluid.setDryBlendDensity(Value dryBlendDensity)
Set the dry blend density of this fluid.
|
void |
WitsmlCementJob.CementStage.Fluid.setDryBlendMass(Value dryBlendMass)
Set the dry blend mass of this fluid.
|
void |
WitsmlCementJob.CementStage.Fluid.setDryBlendSackMass(Value dryBlendSackMass)
Set the dry blend sack mass of this fluid.
|
void |
WitsmlTrajectory.Station.setdTvd(Value dTvd) |
void |
WitsmlWellConstructionAndMaintenanceLedger.setDuration(Value duration) |
void |
WitsmlTrajectory.Station.setEast(Value east)
Set the east of this station.
|
void |
WitsmlTrajectory.Station.CovarianceMatrix.setEastEast(Value eastEast)
Set the east east of this covariance matrix.
|
void |
Location.setEasting(Value easting) |
void |
WitsmlTarget.setEasting(Value easting)
Set the easting of this target.
|
void |
WitsmlTrajectory.Station.CovarianceMatrix.setEastVertical(Value eastVertical)
Set the east vertical of this covariance matrix.
|
void |
WitsmlTarget.setEastWestOffset(Value eastWestOffset)
Set the east west offset of this target.
|
void |
WitsmlTarget.setEastWestSectionOrigin(Value eastWestSectionOrigin)
Set the east west section origin of this target.
|
void |
WitsmlRig.Pump.setEfficiency(Value efficiency) |
void |
WitsmlRigUtilization.Pump.setEfficiency(Value efficiency) |
void |
WitsmlCementJob.CementTest.setElapsedTime(Value elapsedTime)
Set the elapsed time of this cement test.
|
void |
Fluid.setElectricStability(Value electricStability) |
void |
WitsmlWell.Datum.setElevation(Value elevation)
Set the elevation of this datum.
|
void |
WitsmlWell.ReferencePoint.setElevation(Value elevation)
Set the elevation of this reference point.
|
void |
WitsmlWell.Crs.GeodeticModel.setEllipsoidInverseFlattening(Value ellipsoidInverseFlattening)
Set the ellipsoid inverse flattening of this geodetic model.
|
void |
WitsmlWell.Crs.GeodeticModel.setEllipsoidSemiMajorAxis(Value ellipsoidSemiMajorAxis)
Set the ellipsoid semi major axis of this geodetic model.
|
void |
WitsmlCementJob.CementStage.setEndFlowRate(Value endFlowRate)
Set the end flow rate of this cement stage.
|
void |
WitsmlRigUtilization.setEndHoleDepth(Value endHoleDepth) |
void |
WitsmlRigUtilization.setEndOperationTime(Value endOperationTime) |
void |
WitsmlCementJob.CementStage.setEndTubingPressure(Value endTubingPressure)
Set the end tubing pressure of this cement stage.
|
void |
WitsmlDrillingReport.StatusInfo.setETimCirc(Value eTimCirc) |
void |
WitsmlDrillingReport.StatusInfo.setETimDrill(Value eTimDrill) |
void |
WitsmlDrillingReport.StatusInfo.setETimDrillRot(Value eTimDrillRot) |
void |
WitsmlDrillingReport.StatusInfo.setETimDrillSlid(Value eTimDrillSlid) |
void |
WitsmlDrillingReport.StatusInfo.setETimHold(Value eTimHold) |
void |
WitsmlDrillingReport.StatusInfo.setETimLoc(Value eTimLoc) |
void |
WitsmlDrillingReport.StatusInfo.setETimReam(Value eTimReam) |
void |
WitsmlDrillingReport.StatusInfo.setETimSpud(Value eTimSpud) |
void |
WitsmlDrillingReport.StatusInfo.setETimStart(Value eTimStart) |
void |
WitsmlDrillingReport.StatusInfo.setETimSteering(Value eTimSteering) |
void |
WitsmlCementJob.CementStage.Fluid.setExcessRatio(Value excessRatio)
Set the excess ratio of this fluid.
|
void |
WitsmlCementJob.CementStage.setExcessVolume(Value excessVolume)
Set the excess volume of this cement stage.
|
void |
WitsmlWell.Crs.MapProjection.setFalseEasting(Value falseEasting)
Set the false easting of this map projection.
|
void |
WitsmlWell.Crs.MapProjection.setFalseNorthing(Value falseNorthing)
Set the false northing of this map projection.
|
void |
WitsmlTubular.Component.setFatigueEnduranceLimit(Value fatigueEnduranceLimit)
Set the fatigue endurance limit of this component.
|
void |
WitsmlDepthRegistrationImage.setFileSize(Value fileSize) |
void |
WitsmlTubular.Component.setFishNeckInnerDiameter(Value fishNeckInnerDiameter)
Set the fish neck inner diameter of this component.
|
void |
WitsmlTubular.Component.setFishNeckLength(Value fishNeckLength)
Set the fish neck length of this component.
|
void |
WitsmlTubular.Component.setFishNeckOuterDiameter(Value fishNeckOuterDiameter)
Set the fish neck outer diameter of this component.
|
void |
WitsmlRig.SurfaceEquipment.setFlangeHeight(Value flangeHeight) |
void |
WitsmlRigUtilization.SurfaceEquipment.setFlangeHeight(Value flangeHeight) |
void |
WitsmlRig.Degasser.setFlowArea(Value flowArea) |
void |
WitsmlRigUtilization.Degasser.setFlowArea(Value flowArea) |
void |
WitsmlStimJob.setFlowBackPressure(Value flowBackPressure) |
void |
WitsmlStimJob.setFlowBackRate(Value flowBackRate) |
void |
WitsmlStimJob.setFlowBackVolume(Value flowBackVolume) |
void |
WitsmlRig.Shaker.setFlowCapacity(Value flowCapacity) |
void |
WitsmlRig.Centrifuge.setFlowCapacity(Value flowCapacity) |
void |
WitsmlRig.Degasser.setFlowCapacity(Value flowCapacity) |
void |
WitsmlRigUtilization.Shaker.setFlowCapacity(Value flowCapacity) |
void |
WitsmlRigUtilization.Centrifuge.setFlowCapacity(Value flowCapacity) |
void |
WitsmlRigUtilization.Degasser.setFlowCapacity(Value flowCapacity) |
void |
DrillingParameters.setFlowRateAtBit(Value flowRateAtBit) |
void |
WitsmlStimJob.setFluidEfficiency(Value fluidEfficiency) |
void |
WitsmlCementJob.CementStage.Fluid.setFluidLossPeriod(Value fluidLossPeriod)
Set the fluid loss period of this fluid.
|
void |
WitsmlCementJob.CementStage.Fluid.setFluidLossPressure(Value fluidLossPressure)
Set the fluid loss pressure of this fluid.
|
void |
WitsmlCementJob.CementStage.Fluid.setFluidLossTemperature(Value fluidLossTemperature)
Set the fluid loss temperature of this fluid.
|
void |
WitsmlCementJob.CementStage.Fluid.setFluidLossVolume(Value fluidLossVolume)
Set the fluid loss volume of this fluid.
|
void |
WitsmlCementJob.CementStage.Fluid.setFluidVolume(Value fluidVolume)
Set the fluid volume of this fluid.
|
void |
WitsmlWellboreGeology.CuttingsIntervalSet.CuttingsInterval.setFluorescence(Value fluorescence) |
void |
GeologyInterval.setFluorescence(Value fluorescence) |
void |
WitsmlMudLog.Parameter.setForce(Value force)
Set the force of this parameter.
|
void |
WitsmlRealtime.Channel.setFormationExposureTime(Value formationExposureTime)
Set the formation exposure time of this channel.
|
void |
WitsmlDrillingReport.StatusInfo.setFormationStrength(Value formationStrength) |
void |
Lithology.setFraction(Value fraction) |
void |
WitsmlCementJob.CementStage.Fluid.setFreeWaterRatio(Value freeWaterRatio)
Set the free water ratio of this fluid.
|
void |
WitsmlCementJob.CementStage.Fluid.setFreeWaterTemperature(Value freeWaterTemperature)
Set the free water temperature of this fluid.
|
void |
WitsmlWellboreGeometry.Section.setFrictionFactor(Value frictionFactor) |
void |
WitsmlTubular.Component.Stabilizer.setFrictionFactor(Value frictionFactor)
Set the friction factor of this stabilizer.
|
void |
WitsmlRig.setFuelCapacity(Value fuelCapacity) |
void |
WitsmlCementJob.CementStage.setFunnelMudViscosity(Value funnelMudViscosity)
Set the funnel mud viscosity of this cement stage.
|
void |
Fluid.setFunnelViscosity(Value funnelViscosity) |
void |
GeologyInterval.MudGas.setGasBackground(Value gasBackground) |
void |
WitsmlCementJob.CementStage.Fluid.setGasFoamVolume(Value gasFoamVolume)
Set the gas foam volume of this fluid.
|
void |
GeologyInterval.MudGas.setGasPeak(Value gasPeak) |
void |
WitsmlRig.Degasser.setGasSearatingCapacity(Value gasSearatingCapacity) |
void |
WitsmlRigUtilization.Degasser.setGasSearatingCapacity(Value gasSearatingCapacity) |
void |
GeologyInterval.MudGas.setGasTrip(Value gasTrip) |
void |
WitsmlTubular.Component.Stabilizer.setGaugeLengthOfBlade(Value gaugeLengthOfBlade)
Set the gauge length of blade of this stabilizer.
|
void |
WitsmlCementJob.CementStage.setGel10minPressure(Value gel10minPressure)
Set the gel10min pressure of this cement stage.
|
void |
WitsmlCementJob.CementStage.setGel10sPressure(Value gel10sPressure)
Set the gel10s pressure of this cement stage.
|
void |
WitsmlCementJob.CementStage.Fluid.setGelReading10min(Value gelReading10min)
Set the gel reading10min of this fluid.
|
void |
WitsmlCementJob.CementStage.Fluid.setGelReading10s(Value gelReading10s)
Set the gel reading10s of this fluid.
|
void |
WitsmlCementJob.CementStage.Fluid.setGelReading1min(Value gelReading1min)
Set the gel reading1min of this fluid.
|
void |
Fluid.setGels10minute(Value gels10minute) |
void |
Fluid.setGels10second(Value gels10second) |
void |
Fluid.setGels30minute(Value gels30minute) |
void |
WitsmlCementJob.CementStage.Fluid.setGelStrength10min(Value gelStrength10min)
Set the gel strength10min of this fluid.
|
void |
WitsmlCementJob.CementStage.Fluid.setGelStrength1min(Value gelStrength1min)
Set the gel strength1min of this fluid.
|
void |
WitsmlCementJob.CementStage.Fluid.setGetStrength10s(Value getStrength10s)
Set the get strength10s of this fluid.
|
void |
WitsmlTrajectory.Station.Corrections.setGravitationalStrength(Value gravitationalStrength)
Set the gravitational strength of this corrections.
|
void |
WitsmlTrajectory.Station.RawData.setGravitationalStrengthAxial(Value gravitationalStrengthAxial)
Set the gravitational strength axial of this raw data.
|
void |
WitsmlTrajectory.Station.RawData.setGravitationalStrengthTransverse(Value gravitationalStrengthTransverse)
Set the gravitational strength transverse of this raw data.
|
void |
WitsmlTrajectory.Station.RawData.setGravitationalStrengthTransverseNormal(Value gravitationalStrengthTransverseNormal)
Set the gravitational strength transverse normal of this raw data.
|
void |
WitsmlTrajectory.Station.Corrections.setGravitationalStrengthX(Value gravitationalStrengthX)
Set the gravitational strength x of this corrections.
|
void |
WitsmlTrajectory.Station.Corrections.setGravitationalStrengthY(Value gravitationalStrengthY)
Set the gravitational strength y of this corrections.
|
void |
WitsmlTrajectory.Station.setGravitationFieldReference(Value gravitationFieldReference)
Set the gravitation field reference of this station.
|
void |
WitsmlTrajectory.Station.setGravityUncertainty(Value gravityUncertainty)
Set the gravity uncertainty of this station.
|
void |
WitsmlTrajectory.Station.Corrections.setGrid(Value grid)
Set the grid of this corrections.
|
void |
WitsmlTrajectory.setGridConvergence(Value gridConvergence) |
void |
WitsmlTrajectory.setGridCorrection(Value gridCorrection)
Set the grid correction of this trajectory.
|
void |
WitsmlWell.setGroundElevation(Value groundElevation)
Set the ground elevation of this well.
|
void |
WitsmlRigUtilization.setHeaveMx(Value heaveMx) |
void |
WitsmlRig.Degasser.setHeight(Value height) |
void |
WitsmlRigUtilization.Degasser.setHeight(Value height) |
void |
WitsmlCementJob.CementStage.setHeldPressure(Value heldPressure)
Set the held pressure of this cement stage.
|
void |
Fluid.setHighGravitySolids(Value highGravitySolids) |
void |
WitsmlOperationsReport.setHoldTime(Value holdTime)
Set the hold time of this operations report.
|
void |
DrillingParameters.setHoldTime(Value holdTime) |
void |
WitsmlTubular.setHoleDiameter(Value holeDiameter)
Set the hole diameter of this tubular.
|
void |
WitsmlOperationsReport.setHoleDiameter(Value holeDiameter)
Set the hole diameter of this operations report.
|
void |
WitsmlSidewallCore.setHoleDiameter(Value holeDiameter)
Set the hole diameter of this sidewall core.
|
void |
WitsmlRisk.setHoleDiameter(Value holeDiameter)
Set the hole diameter of this risk.
|
void |
DrillingParameters.setHookloadDown(Value hookloadDown) |
void |
WitsmlRig.setHookloadRating(Value hookloadRating) |
void |
DrillingParameters.setHookloadRotating(Value hookloadRotating) |
void |
DrillingParameters.setHookloadUp(Value hookloadUp) |
void |
WitsmlRig.setHookRating(Value hookRating) |
void |
Fluid.setHthpFilterCakeThickness(Value hthpFilterCakeThickness) |
void |
Fluid.setHthpFiltrate(Value hthpFiltrate) |
void |
Fluid.setHthpPressure(Value hthpPressure) |
void |
Fluid.setHthpTemperature(Value hthpTemperature) |
void |
WitsmlConventionalCore.setInclination(Value inclination)
Set the inclination of this conventional core.
|
void |
WitsmlTrajectory.Station.setInclination(Value inclination)
Set the inclination of this station.
|
void |
DrillingParameters.setInclinationBottom(Value inclinationBottom) |
void |
DrillingParameters.setInclinationMax(Value inclinationMax) |
void |
DrillingParameters.setInclinationMin(Value inclinationMin) |
void |
DrillingParameters.setInclinationTop(Value inclinationTop) |
void |
WitsmlRig.SurfaceEquipment.setInjectorStackHeight(Value injectorStackHeight) |
void |
WitsmlRigUtilization.SurfaceEquipment.setInjectorStackHeight(Value injectorStackHeight) |
void |
WitsmlRig.Degasser.setInletLineInnerDiameter(Value inletLineInnerDiameter) |
void |
WitsmlRigUtilization.Degasser.setInletLineInnerDiameter(Value inletLineInnerDiameter) |
void |
WitsmlWellboreGeometry.Section.setInnerDiameter(Value innerDiameter) |
void |
WitsmlTubular.Component.setInnerDiameter(Value innerDiameter)
Set the inner diameter of this component.
|
void |
WitsmlTubular.Component.Connection.setInnerDiameter(Value innerDiameter)
Set the inner diameter of this connection.
|
void |
WitsmlRig.Degasser.setInnerDiameter(Value innerDiameter) |
void |
WitsmlRigUtilization.Degasser.setInnerDiameter(Value innerDiameter) |
void |
WitsmlTubular.Component.MwdTool.setInnerDiameterEquivalent(Value innerDiameterEquivalent)
Set the inner diameter equivalent of this mwd tool.
|
void |
WitsmlRig.Bop.Component.setInnerPassThruDiameter(Value innerPassThruDiameter) |
void |
WitsmlRigUtilization.Bop.Component.setInnerPassThruDiameter(Value innerPassThruDiameter) |
void |
WitsmlConventionalCore.setIntervalLength(Value intervalLength)
Set the interval length of this conventional core.
|
void |
WitsmlDrillingReport.StatusInfo.setKellyBushingElevation(Value kellyBushingElevation) |
void |
WitsmlRig.SurfaceEquipment.setKellyHoseInnerDiameter(Value kellyHoseInnerDiameter) |
void |
WitsmlRigUtilization.SurfaceEquipment.setKellyHoseInnerDiameter(Value kellyHoseInnerDiameter) |
void |
WitsmlRig.SurfaceEquipment.setKellyHoseLength(Value kellyHoseLength) |
void |
WitsmlRigUtilization.SurfaceEquipment.setKellyHoseLength(Value kellyHoseLength) |
void |
WitsmlRig.SurfaceEquipment.setKellyInnerDiameter(Value kellyInnerDiameter) |
void |
WitsmlRigUtilization.SurfaceEquipment.setKellyInnerDiameter(Value kellyInnerDiameter) |
void |
WitsmlRig.SurfaceEquipment.setKellyLength(Value kellyLength) |
void |
WitsmlRigUtilization.SurfaceEquipment.setKellyLength(Value kellyLength) |
void |
WitsmlOperationsReport.setKickTolerancePressure(Value kickTolerancePressure)
Set the kick tolerance pressure of this operations report.
|
void |
WitsmlOperationsReport.setKickToleranceVolume(Value kickToleranceVolume)
Set the kick tolerance volume of this operations report.
|
void |
WitsmlRig.Bop.setKillLineInnerDiameter(Value killLineInnerDiameter) |
void |
WitsmlRigUtilization.Bop.setKillLineInnerDiameter(Value killLineInnerDiameter) |
void |
WitsmlRig.Bop.setKillLineLength(Value killLineLength) |
void |
WitsmlRigUtilization.Bop.setKillLineLength(Value killLineLength) |
void |
WitsmlRig.Bop.setKillLineOuterDiameter(Value killLineOuterDiameter) |
void |
WitsmlRigUtilization.Bop.setKillLineOuterDiameter(Value killLineOuterDiameter) |
void |
WitsmlDrillingReport.StatusInfo.setLastCasingDiameter(Value lastCasingDiameter) |
void |
Location.setLatitude(Value latitude) |
void |
WitsmlWell.Crs.MapProjection.setLatitude1(Value latitude1)
Set the latitude1 of this map projection.
|
void |
WitsmlWell.Crs.MapProjection.setLatitude2(Value latitude2)
Set the latitude2 of this map projection.
|
void |
WitsmlWell.Crs.MapProjection.setLatitudeForScale(Value latitudeForScale)
Set the latitude for scale of this map projection.
|
void |
WitsmlTubular.Component.Connection.setLeakPressureRating(Value leakPressureRating)
Set the leak pressure rating of this connection.
|
void |
WitsmlTubular.Component.setLength(Value length)
Set the length of this component.
|
void |
WitsmlTubular.Component.Nozzle.setLength(Value length)
Set the length of this nozzle.
|
void |
WitsmlTubular.Component.Connection.setLength(Value length)
Set the length of this connection.
|
void |
WitsmlRig.Degasser.setLength(Value length) |
void |
WitsmlRigUtilization.Degasser.setLength(Value length) |
void |
WitsmlTarget.Section.setLength(Value length)
Set the length of this section.
|
void |
Fluid.setLime(Value lime) |
void |
WitsmlCementJob.CementTest.setLinearOverlapLength(Value linearOverlapLength)
Set the linear overlap length of this cement test.
|
void |
WitsmlRig.Pump.setLinerInnerDiameter(Value linerInnerDiameter) |
void |
WitsmlRigUtilization.Pump.setLinerInnerDiameter(Value linerInnerDiameter) |
void |
WitsmlRig.setLiquidMudStorageCapacity(Value liquidMudStorageCapacity) |
void |
Location.setLongitude(Value longitude) |
void |
WitsmlWell.Crs.MapProjection.setLongitude1(Value longitude1)
Set the longitude1 of this map projection.
|
void |
WitsmlWell.Crs.MapProjection.setLongitude2(Value longitude2)
Set the longitude2 of this map projection.
|
void |
WitsmlWell.Crs.MapProjection.setLongitudeForScale(Value longitudeForScale)
Set the longitude for scale of this map projection.
|
void |
Fluid.setLostCirculationMaterial(Value lostCirculationMaterial) |
void |
WitsmlOperationsReport.setLotMudWeightEquivalent(Value lotMudWeightEquivalent)
Set the lot mud weight equivalent of this operations report.
|
void |
WitsmlOperationsReport.setLotTvd(Value lotTvd)
Set the lot TVD of this operations report.
|
void |
Fluid.setLowGravitySolids(Value lowGravitySolids) |
void |
Fluid.setLtlpFilterCakeThickness(Value ltlpFilterCakeThickness) |
void |
Fluid.setLtlpFiltrate(Value ltlpFiltrate) |
void |
WitsmlDrillingReport.StatusInfo.setMaasp(Value maasp) |
void |
Fluid.setMagnesium(Value magnesium) |
void |
WitsmlTrajectory.setMagneticAngle(Value magneticAngle)
Set the magnetic angle of this trajectory.
|
void |
WitsmlTrajectory.Station.Corrections.setMagneticDeclination(Value magneticDeclination)
Set the magnetic declination of this corrections.
|
void |
WitsmlTrajectory.Station.Validations.setMagneticDip(Value magneticDip)
Set the magnetic dip of this validations.
|
void |
WitsmlTrajectory.Station.setMagneticDipAngleReference(Value magneticDipAngleReference)
Set the magnetic dip angle reference of this station.
|
void |
WitsmlTrajectory.Station.setMagneticFieldReference(Value magneticFieldReference)
Set the magnetic field reference of this station.
|
void |
WitsmlTrajectory.Station.RawData.setMagneticStrengthAxial(Value magneticStrengthAxial)
Set the magnetic strength axial of this raw data.
|
void |
WitsmlTrajectory.Station.RawData.setMagneticStrengthTransverse(Value magneticStrengthTransverse)
Set the magnetic strength transverse of this raw data.
|
void |
WitsmlTrajectory.Station.RawData.setMagneticStrengthTransverseNormal(Value magneticStrengthTransverseNormal)
Set the magnetic strength transverse normal of this raw data.
|
void |
WitsmlTrajectory.Station.setMagneticUncertainty(Value magneticUncertainty)
Set the magnetic uncertainty of this station.
|
void |
WitsmlTarget.setMajorAxisLength(Value majorAxisLength)
Set the major axis length of this target.
|
void |
WitsmlTubular.Component.Connection.setMakeUpTorque(Value makeUpTorque)
Set the make up torque of this connection.
|
void |
WitsmlStimJob.StimJobMaterialCatalog.StimProppantAgent.setMassAbsorptionCoefficient(Value massAbsorptionCoefficient) |
void |
WitsmlTubular.Component.setMassPerLength(Value massPerLength)
Set the mass per length of this component.
|
void |
WitsmlTubular.Component.Motor.setMaxBendAngle(Value maxBendAngle)
Set the max bend angle of this motor.
|
void |
WitsmlTubular.Component.Stabilizer.setMaxBladeOuterDiameter(Value maxBladeOuterDiameter)
Set the max blade outer diameter of this stabilizer.
|
void |
WitsmlRig.Pit.setMaxCapacity(Value maxCapacity) |
void |
WitsmlRigUtilization.Pit.setMaxCapacity(Value maxCapacity) |
void |
WitsmlOperationsReport.setMaxCasingPressure(Value maxCasingPressure)
Set the max casing pressure of this operations report.
|
void |
GeologyInterval.Chromatograph.setMaxCO2(Value maxCO2) |
void |
GeologyInterval.MudGas.setMaxConnectionGas(Value maxConnectionGas) |
void |
WitsmlWellboreGeometry.Section.setMaxDiameter(Value maxDiameter) |
void |
WitsmlRig.Bop.Component.setMaxDiameter(Value maxDiameter) |
void |
WitsmlRigUtilization.Bop.Component.setMaxDiameter(Value maxDiameter) |
void |
WitsmlCementJob.CementStage.setMaxDisplacementRate(Value maxDisplacementRate)
Set the max displacement rate of this cement stage.
|
void |
WitsmlTubular.Component.setMaxDls(Value maxDls)
Set the max DLS of this component.
|
void |
WitsmlTubular.Component.RotarySteerableTool.setMaxDownLinkFlowRate(Value maxDownLinkFlowRate) |
void |
GeologyInterval.Chromatograph.setMaxEthane(Value maxEthane) |
void |
WitsmlTubular.Component.Motor.setMaxFlowrate(Value maxFlowrate)
Set the max flowrate of this motor.
|
void |
WitsmlTubular.Component.RotarySteerableTool.setMaxFlowRate(Value maxFLowRate)
Set the max f low rate of this rotary steerable tool.
|
void |
WitsmlTubular.Component.MwdTool.setMaxFLowRate(Value maxFLowRate)
Set the max f low rate of this mwd tool.
|
void |
WitsmlSurveyProgram.Section.setMaxFrequency(Value maxFrequency)
Set the max frequency of this section.
|
void |
GeologyInterval.Chromatograph.setMaxH2S(Value maxH2S) |
void |
WitsmlRig.setMaxHeave(Value maxHeave) |
void |
WitsmlTubular.Component.RotarySteerableTool.setMaxHoleSize(Value maxHoleSize) |
void |
WitsmlRig.Pump.setMaxHydraulics(Value maxHydraulics) |
void |
WitsmlRigUtilization.Pump.setMaxHydraulics(Value maxHydraulics) |
void |
WitsmlBhaRun.setMaximumDls(Value maximumDls)
Set the maximum DLS of this BHA run.
|
void |
DrillingParameters.setMaximumDowhholeMudTemperature(Value maximumDowhholeMudTemperature) |
void |
WitsmlStimJob.setMaximumFluidRate(Value maximumFluidRate) |
void |
WitsmlStimJob.setMaximumJobPressure(Value maximumJobPressure) |
void |
DrillingParameters.setMaximumTorqueOnBottom(Value maximumTorqueOnBottom) |
void |
GeologyInterval.Chromatograph.setMaxIsoButane(Value maxIsoButane) |
void |
GeologyInterval.Chromatograph.setMaxIsoHexane(Value maxIsoHexane) |
void |
GeologyInterval.Chromatograph.setMaxIsoPentane(Value maxIsoPentane) |
void |
WitsmlRig.Pump.setMaxMechanicalPower(Value maxMechanicalPower) |
void |
WitsmlRigUtilization.Pump.setMaxMechanicalPower(Value maxMechanicalPower) |
void |
GeologyInterval.Chromatograph.setMaxMethane(Value maxMethane) |
void |
WitsmlRig.setMaxMotionCompensation(Value maxMotionCompensation) |
void |
GeologyInterval.Chromatograph.setMaxNeoPentane(Value maxNeoPentane) |
void |
GeologyInterval.Chromatograph.setMaxNorButane(Value maxNorButane) |
void |
GeologyInterval.Chromatograph.setMaxNorHexane(Value maxNorHexane) |
void |
GeologyInterval.Chromatograph.setMaxNorPentane(Value maxNorPentane) |
void |
WitsmlTubular.Component.Motor.setMaxOperatingTemperature(Value maxOperatingTemperature)
Set the max operating temperature of this motor.
|
void |
WitsmlTubular.Component.setMaxOuterDiameter(Value maxOuterDiameter)
Set the max outer diameter of this component.
|
void |
WitsmlRig.Pump.setMaxPressure(Value maxPressure) |
void |
WitsmlRigUtilization.Pump.setMaxPressure(Value maxPressure) |
void |
GeologyInterval.Chromatograph.setMaxPropane(Value maxPropane) |
void |
WitsmlWellboreGeology.CuttingsIntervalSet.CuttingsInterval.setMaxSize(Value maxSize) |
void |
GeologyInterval.setMaxSize(Value maxSize) |
void |
WitsmlTubular.Component.RotarySteerableTool.setMaxSpeed(Value maxSpeed) |
void |
WitsmlRig.Pump.setMaxSpeed(Value maxSpeed) |
void |
WitsmlRigUtilization.Pump.setMaxSpeed(Value maxSpeed) |
void |
WitsmlCementJob.CementStage.setMaxSqueezeFlowrate(Value maxSqueezeFlowrate)
Set the max squeeze flowrate of this cement stage.
|
void |
WitsmlRig.setMaxSwivelRaing(Value maxSwivelRaing) |
void |
WitsmlTubular.Component.MwdTool.setMaxTemperature(Value maxTemperature)
Set the max temperature of this mwd tool.
|
void |
WitsmlRig.setMaxVariableDeckLoad(Value maxVariableDeckLoad) |
void |
WitsmlTubular.Component.RotarySteerableTool.setMaxWeight(Value maxWeight) |
void |
Fluid.setMbt(Value mbt) |
void |
WitsmlWellboreMarker.setMd(Value md) |
void |
Fluid.setMd(Value md) |
void |
WitsmlRealtime.setMd(Value md)
Set the md of this realtime.
|
void |
WitsmlRealtime.Channel.setMd(Value md)
Set the md of this channel.
|
void |
WitsmlWell.Datum.setMd(Value md)
Set the md of this datum.
|
void |
WitsmlWell.ReferencePoint.setMd(Value md)
Set the md of this reference point.
|
void |
WitsmlMessage.setMd(Value md)
Set the MD of this message.
|
void |
WitsmlOperationsReport.setMd(Value md)
Set the md of this operations report.
|
void |
WitsmlDrillingReport.StatusInfo.setMd(Value md) |
void |
WitsmlAttachment.setMd(Value md)
Set MD of this attachment.
|
void |
WitsmlSidewallCore.Sample.setMd(Value md)
Set the MD of this sample.
|
void |
WitsmlTrajectory.Station.setMd(Value md)
Set the MD of this station.
|
void |
WitsmlFluidsReport.setMd(Value md)
Set the MD of this fluids report.
|
void |
MdInterval.setMdBase(Value mdBase) |
void |
WitsmlMessage.setMdBit(Value mdBit)
Set the MD bit of this message.
|
void |
WitsmlAttachment.setMdBit(Value mdBit)
Set the MD bit of this attachment.
|
void |
WitsmlWellbore.setMdBitCurrent(Value mdBitCurrent)
Set the MD bit current of this wellbore.
|
void |
WitsmlWellboreGeometry.setMdBottom(Value mdBottom) |
void |
WitsmlWellboreGeometry.Section.setMdBottom(Value mdBottom) |
void |
WitsmlConventionalCore.setMdBottom(Value mdBottom)
Set the md bottom of this conventional core.
|
void |
Lithology.Qualifier.setMdBottom(Value mdBottom) |
void |
WitsmlMudLog.Parameter.setMdBottom(Value mdBottom)
Set the md bottom of this parameter.
|
void |
WitsmlCementJob.CementStage.setMdBottom(Value mdBottom)
Set the md bottom of this cement stage.
|
void |
WitsmlCementJob.CementStage.Fluid.setMdBottom(Value mdBottom)
Set the md bottom of this fluid.
|
void |
GeologyInterval.setMdBottom(Value mdBottom) |
void |
GeologyInterval.Chromatograph.setMdBottom(Value mdBottom) |
void |
WitsmlCementJob.CementStage.setMdCirculateOut(Value mdCirculateOut)
Set the md circulate out of this cement stage.
|
void |
WitsmlCementJob.CementStage.setMdCoilTubing(Value mdCoilTubing)
Set the md coil tubing of this cement stage.
|
void |
WitsmlWellbore.setMdCurrent(Value mdCurrent)
Set the MD current of this wellbore.
|
void |
WitsmlCementJob.CementTest.setMdDiverterTool(Value mdDiverterTool)
Set the md diverter tool of this cement test.
|
void |
WitsmlMudLog.setMdEnd(Value mdEnd)
Set the end MD of this mud log.
|
void |
WitsmlSurveyProgram.Section.setMdEnd(Value mdEnd)
Set the end MD of this section.
|
void |
WitsmlRisk.setMdEnd(Value mdEnd)
Set the MD end of this risk.
|
void |
WitsmlDrillingReport.StatusInfo.setMdFormationStrength(Value mdFormationStrength) |
void |
WitsmlCementJob.setMdHole(Value mdHole)
Set the md hole of this cement job.
|
void |
WitsmlDrillingReport.StatusInfo.setMdHoleDiameterStart(Value mdHoleDiamaterStart) |
void |
DrillingParameters.setMdHoleEnd(Value mdHoleEnd) |
void |
DrillingParameters.setMdHoleStart(Value mdHoleStart) |
void |
WitsmlWellbore.setMdKickoff(Value mdKickoff)
Set the MD kickoff of this wellbore.
|
void |
WitsmlDrillingReport.StatusInfo.setMdKickoff(Value mdKickoff) |
void |
WitsmlDrillingReport.StatusInfo.setMdLastCasingDiameter(Value mdLastCasingDiameter) |
void |
WitsmlFormationMarker.setMdLogSample(Value mdLogSample)
Set the MD log sample of this formation marker.
|
void |
WitsmlTrajectory.setMdMax(Value mdMax)
Set the max MD of this trajectory.
|
void |
WitsmlTrajectory.setMdMin(Value mdMin)
Set the min MD of this trajectory.
|
void |
WitsmlDrillingReport.StatusInfo.setMdPilotHolePlanned(Value mdPilotHolePlanned) |
void |
WitsmlWellbore.setMdPlanned(Value mdPlanned)
Set the MD planned of this wellbore.
|
void |
WitsmlOperationsReport.setMdPlanned(Value mdPlanned)
Set the md planned of this operations report.
|
void |
WitsmlDrillingReport.StatusInfo.setMdPlanned(Value mdPlanned) |
void |
WitsmlCementJob.setMdPlugBottom(Value mdPlugBottom)
Set the md plug bottom of this cement job.
|
void |
WitsmlDrillingReport.StatusInfo.setMdPlugTop(Value mdPlugTop) |
void |
WitsmlCementJob.setMdPlugTop(Value mdPlugTop)
Set the md plug top of this cement job.
|
void |
WitsmlFormationMarker.setMdPrognosed(Value mdPrognosed)
Set the MD prognosed of this formation marker.
|
void |
WitsmlCementJob.setMdShoe(Value mdShoe)
Set the md shoe of this cement job.
|
void |
WitsmlCementJob.setMdSqueeze(Value mdSqueeze)
Set the md squeeze of this cement job.
|
void |
WitsmlMudLog.setMdStart(Value mdStart)
Set the start MD of this mud log.
|
void |
WitsmlSurveyProgram.Section.setMdStart(Value mdStart)
Set the start MD of this section.
|
void |
WitsmlRisk.setMdStart(Value mdStart)
Set the start MD of this risk.
|
void |
WitsmlCementJob.CementStage.setMdString(Value mdString)
Set the md string of this cement stage.
|
void |
WitsmlCementJob.setMdStringShoe(Value mdStringShoe)
Set the md string shoe of this cement job.
|
void |
WitsmlWellbore.setMdSubSeaPlanned(Value mdSubSeaPlanned)
Set the MD sub sea planned of this wellbore.
|
void |
WitsmlCementJob.CementStage.setMdTool(Value mdTool)
Set the md tool of this cement stage.
|
void |
WitsmlWellboreGeometry.Section.setMdTop(Value mdTop) |
void |
WitsmlConventionalCore.setMdTop(Value mdTop)
Set the md top of this conventional core.
|
void |
Lithology.Qualifier.setMdTop(Value mdTop) |
void |
WitsmlMudLog.Parameter.setMdTop(Value mdTop)
Set the md top of this parameter.
|
void |
WitsmlCementJob.CementStage.setMdTop(Value mdTop)
Set the md top of this cement stage.
|
void |
WitsmlCementJob.CementStage.Fluid.setMdTop(Value mdTop)
Set the md top of this fluid.
|
void |
MdInterval.setMdTop(Value mdTop) |
void |
GeologyInterval.setMdTop(Value mdTop) |
void |
GeologyInterval.Chromatograph.setMdTop(Value mdTop) |
void |
WitsmlCementJob.CementTest.setMdTopCement(Value mdTopCement)
Set the md top cement of this cement test.
|
void |
WitsmlFormationMarker.setMdTopSample(Value mdTopSample)
Set the MD top sample of this formation marker.
|
void |
WitsmlCementJob.setMdWater(Value mdWater)
Set the md water of this cement job.
|
void |
Fluid.setMf(Value mf) |
void |
WitsmlTubular.Component.Motor.setMinBendAngle(Value minBendAngle)
Set the min bend angle of this motor.
|
void |
WitsmlTubular.Component.Stabilizer.setMinBladeOuterDiameter(Value minBladeOuterDiameter)
Set the min blade outer diameter of this stabilizer.
|
void |
GeologyInterval.Chromatograph.setMinCO2(Value minCO2) |
void |
WitsmlRig.Bop.Component.setMinDiameter(Value minDiameter) |
void |
WitsmlRigUtilization.Bop.Component.setMinDiameter(Value minDiameter) |
void |
WitsmlTubular.Component.RotarySteerableTool.setMinDownLinkFlowRate(Value minDownLinkFlowRate) |
void |
GeologyInterval.Chromatograph.setMinEthane(Value minEthane) |
void |
WitsmlTubular.Component.Motor.setMinFlowrate(Value minFlowrate)
Set the min flowrate of this motor.
|
void |
WitsmlTubular.Component.MwdTool.setMinFlowRate(Value minFlowRate)
Set the min flow rate of this mwd tool.
|
void |
WitsmlTubular.Component.RotarySteerableTool.setMinFlowRate(Value minFlowRate)
Set the min flow rate of this rotary steerable tool.
|
void |
GeologyInterval.Chromatograph.setMinH2S(Value minH2S) |
void |
WitsmlTubular.Component.RotarySteerableTool.setMinHoleSize(Value minHoleSize) |
void |
DrillingParameters.setMinimumTorqueOnBottom(Value minimumTorqueOnBottom) |
void |
GeologyInterval.Chromatograph.setMinIsoButane(Value minIsoButane) |
void |
GeologyInterval.Chromatograph.setMinIsoHexane(Value minIsoHexane) |
void |
GeologyInterval.Chromatograph.setMinIsoPentane(Value minIsoPentane) |
void |
WitsmlRig.Shaker.setMinMeshSize(Value minMeshSize) |
void |
WitsmlRigUtilization.Shaker.setMinMeshSize(Value minMeshSize) |
void |
GeologyInterval.Chromatograph.setMinMethane(Value minMethane) |
void |
WitsmlRig.setMinMotionCompensation(Value minMotionCompensation) |
void |
GeologyInterval.Chromatograph.setMinNeoPentane(Value minNeoPentane) |
void |
GeologyInterval.Chromatograph.setMinNorButane(Value minNorButane) |
void |
GeologyInterval.Chromatograph.setMinNorHexane(Value minNorHexane) |
void |
GeologyInterval.Chromatograph.setMinNorPentane(Value minNorPentane) |
void |
WitsmlTarget.setMinorAxisWidth(Value minorAxisWidth)
Set the minor axis width of this target.
|
void |
WitsmlTubular.Component.setMinPassThroughDiameter(Value minPassThroughDiameter)
Set the min pass through diameter of this component.
|
void |
GeologyInterval.Chromatograph.setMinPropane(Value minPropane) |
void |
WitsmlWellboreGeology.CuttingsIntervalSet.CuttingsInterval.setMinSize(Value minSize) |
void |
GeologyInterval.setMinSize(Value minSize) |
void |
WitsmlRigUtilization.setMotionCompensationMn(Value motionCompensationMn) |
void |
WitsmlRigUtilization.setMotionCompensationMx(Value motionCompensationMx) |
void |
WitsmlRig.setMotionCompensationStroke(Value motionCompensationStroke) |
void |
WitsmlCementJob.CementStage.setMudCirculationFlowRate(Value mudCirculationFlowRate)
Set the mud circulation flow rate of this cement stage.
|
void |
WitsmlCementJob.CementStage.setMudCirculationPressure(Value mudCirculationPressure)
Set the mud circulation pressure of this cement stage.
|
void |
WitsmlCementJob.CementStage.setMudCirculationTime(Value mudCirculationTime)
Set the mud circulation time of this cement stage.
|
void |
DrillingParameters.setMudDensity(Value mudDensity) |
void |
WitsmlCementJob.CementStage.setMudDensity(Value mudDensity)
Set the mud density of this cement stage.
|
void |
GeologyInterval.Chromatograph.setMudDensityIn(Value mudDensityIn) |
void |
GeologyInterval.Chromatograph.setMudDensityOut(Value mudDensityOut) |
void |
WitsmlCementJob.CementStage.setMudLostVolume(Value mudLostVolume)
Set the mud lost volume of this cement stage.
|
void |
Fluid.setMudPh(Value mudPh) |
void |
Fluid.setMudPhTemperature(Value mudPhTemperature) |
void |
WitsmlRig.Degasser.setMudSealDepth(Value mudSealDepth) |
void |
WitsmlRigUtilization.Degasser.setMudSealDepth(Value mudSealDepth) |
void |
WitsmlMudLog.Parameter.setMudWeightEquivalent(Value mudWeightEquivalent)
Set the mud weight equivalent of this parameter.
|
void |
WitsmlCementJob.CementTest.setNegativeTestEmw(Value negativeTestEmw)
Set the negative test emw of this cement test.
|
void |
WitsmlChannel.setNominalHoleSize(Value nominalHoleSize) |
void |
WitsmlChannelSet.setNominalHoleSize(Value nominalHoleSize) |
void |
WitsmlLog2.setNominalHoleSize(Value nominalHoleSize) |
void |
WitsmlTrajectory.Station.setNorth(Value north)
Set the north of this station.
|
void |
WitsmlTrajectory.Station.CovarianceMatrix.setNorthEast(Value northEast)
Set the north east of this covariance matrix.
|
void |
Location.setNorthing(Value northing) |
void |
WitsmlTarget.setNorthing(Value northing)
Set the northing of this target.
|
void |
WitsmlTrajectory.Station.CovarianceMatrix.setNorthNorth(Value northNorth)
Set the north north of this covariance matrix.
|
void |
WitsmlTarget.setNorthSouthOffset(Value northSouthOffset)
Set the north south offset of this target.
|
void |
WitsmlTarget.setNorthSouthSectionOrigin(Value northSouthSectionOrigin)
Set the north south section origin of this target.
|
void |
WitsmlTrajectory.Station.CovarianceMatrix.setNorthVertical(Value northVertical)
Set the north vertical of this covariance matrix.
|
void |
WitsmlTubular.Component.Motor.setNozzleDiameter(Value nozzleDiameter)
Set the nozzle diameter of this motor.
|
void |
WitsmlTubular.Component.setNozzleFlowArea(Value nozzleFlowArea)
Set the nozzle flow area of this component.
|
void |
WitsmlWellbore.setNTargetDays(Value nTargetDays)
Set the n target days of this wellbore.
|
void |
WitsmlTubular.Component.Sensor.setOffsetBot(Value offsetBot)
Set the offset from the bottom of the MWD tool for this sensor.
|
void |
Fluid.setOil(Value oil) |
void |
Fluid.setOilOnCuttings(Value oilOnCuttings) |
void |
WitsmlTubular.Component.RotarySteerableTool.setOpenPadOuterDiameter(Value openPadOuterDiameter) |
void |
WitsmlTubular.Component.RotarySteerableTool.setOperatingSpeed(Value operatingSpeed) |
void |
WitsmlWell.setOperatorInterestShare(Value operatorInterestShare)
Set the operator interest share of this well.
|
void |
WitsmlStimJob.setOrderedHydraulicHorsepower(Value orderedHydraulicHorsepower) |
void |
WitsmlTrajectory.setOriginEw(Value originEw)
Set the east/west origin of this trajectory.
|
void |
WitsmlWell.Crs.MapProjection.setOriginLatitude(Value originLatitude)
Set the origin latitude of this map projection.
|
void |
WitsmlWell.Crs.MapProjection.setOriginLongitude(Value originLongitude)
Set the origin longitude of this map projection.
|
void |
WitsmlTrajectory.setOriginNs(Value originNs)
Set the north/south origin of this trajectory.
|
void |
WitsmlWellboreGeometry.Section.setOuterDiameter(Value outerDiameter) |
void |
WitsmlTubular.Component.setOuterDiameter(Value outerDiameter)
Set the outer diameter of this component.
|
void |
WitsmlTubular.Component.Connection.setOuterDiameter(Value outerDiameter)
Set the outer diameter of this connection.
|
void |
DrillingParameters.setOverPull(Value overPull) |
void |
WitsmlCementJob.setOverPull(Value overPull)
Set the over pull of this cement job.
|
void |
WitsmlTubular.Component.RotarySteerableTool.setPadLength(Value padLength) |
void |
WitsmlTubular.Component.RotarySteerableTool.setPadOffset(Value padOffset) |
void |
WitsmlTubular.Component.RotarySteerableTool.setPadWidth(Value padWidth) |
void |
WitsmlTubular.Component.Bit.setPassThroughDiameter(Value passThroughDiameter)
Set the pass through diameter of this bit.
|
void |
WitsmlFormationMarker.setPerpendicularThickness(Value perpendicularThickness)
Set the perpendicular thickness of this formation marker.
|
void |
WitsmlWell.Crs.MapProjection.setPerspectiveHeight(Value perspectiveHeight)
Set the perspective height of this map projection.
|
void |
WitsmlTubular.Component.Bit.setPilotDiameter(Value pilotDiameter)
Set the pilot diameter of this bit.
|
void |
WitsmlDrillingReport.StatusInfo.setPilotHoleDiameter(Value pilotHoleDiameter) |
void |
WitsmlCementJob.setPipeAverageTorque(Value pipeAverageTorque)
Set the pipe average torque of this cement job.
|
void |
WitsmlCementJob.setPipeInitialTorque(Value pipeInitialTorque)
Set the pipe initial torque of this cement job.
|
void |
WitsmlCementJob.setPipeMaxTorque(Value pipeMaxTorque)
Set the pipe max torque of this cement job.
|
void |
WitsmlCementJob.setPipeReciprocationEndTime(Value pipeReciprocationEndTime)
Set the pipe reciprocation end time of this cement job.
|
void |
WitsmlCementJob.setPipeReciprocationRate(Value pipeReciprocationRate)
Set the pipe reciprocation rate of this cement job.
|
void |
WitsmlCementJob.setPipeReciprocationStartTime(Value pipeReciprocationStartTime)
Set the pipe reciprocation start time of this cement job.
|
void |
WitsmlCementJob.setPipeReciprocationStrokeLength(Value pipeReciprocationStrokeLength)
Set the pipe reciprocation stroke length of this cement job.
|
void |
WitsmlCementJob.setPipeRotationRate(Value pipeRotationRate)
Set the pipe rotation rate of this cement job.
|
void |
WitsmlCementJob.CementTest.setPitFormationBreakdownGradient(Value pitFormationBreakdownGradient)
Set the pit formation breakdown gradient of this cement test.
|
void |
WitsmlBhaRun.setPlannedDls(Value plannedDls)
Set the planned DLS of this BHA run.
|
void |
WitsmlCementJob.CementStage.setPlasticMudViscosity(Value plasticMudViscosity)
Set the plastic mud viscosity of this cement stage.
|
void |
Fluid.setPlasticViscosity(Value plasticViscosity) |
void |
WitsmlSidewallCore.setPlugDiameter(Value plugDiameter)
Set the plug diameter of this sidewall core.
|
void |
GeologyInterval.setPlugLength(Value plugLength) |
void |
Fluid.setPm(Value pm) |
void |
Fluid.setPmFiltrate(Value pmFiltrate) |
void |
Fluid.setPolymer(Value polymer) |
void |
WitsmlCementJob.CementTest.setPositiveTestEmw(Value positiveTestEmw)
Set the positive test emw of this cement test.
|
void |
WitsmlRig.setPotableWaterCapacity(Value potableWaterCapacity) |
void |
Fluid.setPotassium(Value potassium) |
void |
WitsmlRigUtilization.setPowerDrawWorks(Value powerDrawWorks) |
void |
WitsmlCementJob.CementStage.Fluid.setPowerLawIndex(Value powerLawIndex)
Set the power law index of this fluid.
|
void |
WitsmlDrillingReport.StatusInfo.setPresKickTol(Value presKickTol) |
void |
WitsmlDrillingReport.StatusInfo.setPresLotEmw(Value presLotEmw) |
void |
Fluid.Rheometer.setPressure(Value pressure) |
void |
WitsmlCementJob.CementTest.setPressure(Value pressure)
Set the pressure of this cement test.
|
void |
WitsmlTubular.Component.RotarySteerableTool.setPressureDropFactor(Value pressureDropFactor) |
void |
DrillingParameters.setPressureDropInBit(Value pressureDropInBit) |
void |
WitsmlMudLog.Parameter.setPressureGradient(Value pressureGradient)
Set the pressure gradient of this parameter.
|
void |
WitsmlTubular.Component.Motor.setPressureLossFact(Value pressureLossFact)
Set the pressure loss fact of this motor.
|
void |
WitsmlRig.Bop.setPressureRating(Value pressureRating) |
void |
WitsmlRig.Degasser.setPressureRating(Value pressureRating) |
void |
WitsmlRig.SurfaceEquipment.setPressureRating(Value pressureRating) |
void |
WitsmlRigUtilization.Bop.setPressureRating(Value pressureRating) |
void |
WitsmlRigUtilization.Degasser.setPressureRating(Value pressureRating) |
void |
WitsmlRigUtilization.SurfaceEquipment.setPressureRating(Value pressureRating) |
void |
WitsmlCementJob.CementStage.setPriorBumpPressure(Value priorBumpPressure)
Set the prior bump pressure of this cement stage.
|
void |
WitsmlRig.Pump.setPulsationDampenerPressure(Value pulsationDampenerPressure) |
void |
WitsmlRigUtilization.Pump.setPulsationDampenerPressure(Value pulsationDampenerPressure) |
void |
WitsmlRig.Pump.setPulsationDampenerVolume(Value pulsationDampenerVolume) |
void |
WitsmlRigUtilization.Pump.setPulsationDampenerVolume(Value pulsationDampenerVolume) |
void |
WitsmlRig.SurfaceEquipment.setPumpDischargeLineInnerDiameter(Value pumpDischargeLineInnerDiameter) |
void |
WitsmlRigUtilization.SurfaceEquipment.setPumpDischargeLineInnerDiameter(Value pumpDischargeLineInnerDiameter) |
void |
WitsmlRig.SurfaceEquipment.setPumpDischargeLineLength(Value pumpDischargeLineLength) |
void |
WitsmlRigUtilization.SurfaceEquipment.setPumpDischargeLineLength(Value pumpDischargeLineLength) |
void |
DrillingParameters.setPumpFlowRate(Value pumpFlowRate) |
void |
WitsmlCementJob.CementStage.setPumpFlowrateEnd(Value pumpFlowrateEnd)
Set the pump flowrate end of this cement stage.
|
void |
WitsmlCementJob.CementStage.setPumpFlowrateStart(Value pumpFlowrateStart)
Set the pump flowrate start of this cement stage.
|
void |
WitsmlTubular.Component.Jar.setPumpOpenForce(Value pumpOpenForce)
Set the pump open force of this jar.
|
void |
WitsmlCementJob.CementStage.Fluid.PumpSchedule.setPumpTime(Value pumpTime)
Set the pump time of this pump schedule.
|
void |
WitsmlCementJob.CementStage.Fluid.PumpSchedule.setRate(Value rate)
Set the rate of this pump schedule.
|
void |
WitsmlRigUtilization.setRatingBlock(Value ratingBlock) |
void |
WitsmlRig.setRatingDerrick(Value derrickRating) |
void |
WitsmlRigUtilization.setRatingDrawWorks(Value ratingDrawWorks) |
void |
WitsmlRigUtilization.setRatingHkld(Value ratingHkld) |
void |
WitsmlRigUtilization.setRatingRotSystem(Value ratingRotSystem) |
void |
WitsmlRigUtilization.setRatingSwivel(Value ratingSwivel) |
void |
WitsmlRigUtilization.setRatingTqRotSys(Value ratingTqRotSys) |
void |
WitsmlTubular.Component.HoleOpener.setReamerDiameter(Value reamerDiameter)
Set the reamer diameter of this hole opener.
|
void |
WitsmlOperationsReport.setReamingTime(Value reamingTime)
Set the reaming time of this operations report.
|
void |
DrillingParameters.setReamingTime(Value reamingTime) |
void |
WitsmlConventionalCore.setRecoveredLength(Value recoveredLength)
Set the recovered length of this conventional core.
|
void |
WitsmlConventionalCore.setRecoveryCalculated(Value recoveryCalculated)
Set the recovery calculated of this conventional core.
|
void |
WitsmlRig.SurfaceEquipment.setReelLength(Value reelLength) |
void |
WitsmlRigUtilization.SurfaceEquipment.setReelLength(Value reelLength) |
void |
WitsmlRig.SurfaceEquipment.setReelOuterDiameter(Value reelOuterDiameter) |
void |
WitsmlRigUtilization.SurfaceEquipment.setReelOuterDiameter(Value reelOuterDiameter) |
void |
WitsmlRig.SurfaceEquipment.setReelWidth(Value reelWidth) |
void |
WitsmlRigUtilization.SurfaceEquipment.setReelWidth(Value reelWidth) |
void |
WitsmlCementJob.CementStage.Fluid.setReservedVolume(Value reservedVolume)
Set the reserved volume of this fluid.
|
void |
WitsmlRig.setRiserAngleLimit(Value riserAngleLimit) |
void |
WitsmlRigUtilization.setRiserAngleLimit(Value riserAngleLimit) |
void |
WitsmlRigUtilization.Pump.setRodInnerDiameter(Value rodInnerDiameter) |
void |
WitsmlRig.Pump.setRodOuterDiameter(Value rodOuterDiameter) |
void |
WitsmlRigUtilization.Pump.setRodOuterDiameter(Value rodOuterDiameter) |
void |
WitsmlDrillingReport.StatusInfo.setRopAv(Value ropAv) |
void |
DrillingParameters.setRopAverage(Value ropAverage) |
void |
GeologyInterval.setRopAverage(Value ropAverage) |
void |
DrillingParameters.setRopMax(Value ropMax) |
void |
GeologyInterval.setRopMax(Value ropMax) |
void |
DrillingParameters.setRopMin(Value ropMin) |
void |
GeologyInterval.setRopMin(Value ropMin) |
void |
WitsmlOperationsReport.setRotaryDrillingTime(Value rotaryDrillingTime)
Set the rotary drilling time of this operations report.
|
void |
DrillingParameters.setRotaryDrillingTime(Value rotaryDrillingTime) |
void |
WitsmlRig.setRotarySizeOpening(Value rotarySizeOpening) |
void |
WitsmlRig.setRotatingSystemRating(Value rotatingSystemRating) |
void |
WitsmlTarget.setRotation(Value rotation)
Set the rotation of this target.
|
void |
WitsmlRig.setRotationalTorqueRating(Value rotationalTorqueRating) |
void |
WitsmlTubular.Component.Motor.setRotorDiameterAtNozzle(Value rotorDiameterAtNozzle)
Set the rotor diameter at nozzle of this motor.
|
void |
WitsmlRigUtilization.setRotSizeOpening(Value rotSizeOpening) |
void |
DrillingParameters.setRpmAverage(Value rpmAverage) |
void |
DrillingParameters.setRpmAverageDownhole(Value rpmAverageDownhole) |
void |
DrillingParameters.setRpmMax(Value rpmMax) |
void |
DrillingParameters.setRpmMin(Value rpmMin) |
void |
WitsmlCementJob.CementStage.Fluid.Additive.setSackVolume(Value sackVolume)
Set the sack volume of this additive.
|
void |
WitsmlCementJob.CementStage.Fluid.Additive.setSackWeight(Value sackWeight)
Set the sack weight of this additive.
|
void |
WitsmlTrajectory.Station.Corrections.setSagAzimuth(Value sagAzimuth)
Set the sag azimuth of this corrections.
|
void |
WitsmlTrajectory.Station.Corrections.setSagInclination(Value sagInclination)
Set the sag inclination of this corrections.
|
void |
Fluid.setSand(Value sand) |
void |
WitsmlWell.Crs.MapProjection.setScaleFactor(Value scaleFactor)
Set the scale factor of this map projection.
|
void |
WitsmlWell.Crs.GeodeticModel.setScaleFactor(Value scaleFactor)
Set the scale factor of this geodetic model.
|
void |
WitsmlTubular.Component.Jar.setSealFrictionForce(Value sealFrictionForce)
Set the seal friction force of this jar.
|
void |
WitsmlLog.Curve.setSensorOffset(Value sensorOffset)
Set the sensor offset of this curve.
|
void |
WitsmlTrajectory.Station.Corrections.setSensorOffset(Value sensorOffset)
Set the sensor offset of this corrections.
|
void |
WitsmlWellboreGeology.CuttingsIntervalSet.CuttingsInterval.setShaleDensity(Value shaleDensity) |
void |
GeologyInterval.setShaleDensity(Value shaleDensity) |
void |
WitsmlCementJob.CementStage.Fluid.PumpSchedule.setShutdownTime(Value shutdownTime)
Set the shutdown time of this pump schedule.
|
void |
WitsmlRig.Bop.setSize(Value size) |
void |
WitsmlRigUtilization.Bop.setSize(Value size) |
void |
WitsmlRigUtilization.setSizeDrillLine(Value sizeDrillLine) |
void |
DrillingParameters.setSlackOff(Value slackOff) |
void |
WitsmlCementJob.setSlackOff(Value slackOff)
Set the slack off of this cement job.
|
void |
DrillingParameters.setslideDrillingTime(Value slideDrillingTime) |
void |
WitsmlOperationsReport.setSlideDrillingTime(Value slideDrillingTime)
Set the slide drilling time of this operations report.
|
void |
WitsmlCementJob.CementStage.Fluid.setSlurryDensityAtPressure(Value slurryDensityAtPressure)
Set the slurry density at pressure of this fluid.
|
void |
WitsmlCementJob.CementStage.Fluid.setSlurryYield(Value slurryYield)
Set the slurry yield of this fluid.
|
void |
Fluid.setSolidsContentCalculated(Value solidsContentCalculated) |
void |
Fluid.setSolidsFromRetort(Value solidsFromRetort) |
void |
WitsmlCementJob.CementStage.Fluid.setSolidVolumeFraction(Value solidVolumeFraction)
Set the solid volume fraction of this fluid.
|
void |
Location.setSouthing(Value southing) |
void |
Fluid.Rheometer.Viscosity.setSpeed(Value speed)
Set therotational speed of the rheometer.
|
void |
WitsmlWell.Crs.MapProjection.setSpheroidRadius(Value spheroidRadius)
Set the spheroid radius of this map projection.
|
void |
WitsmlOperationsReport.setSpudTime(Value spudTime)
Set the spud time of this operations report.
|
void |
WitsmlCementJob.CementStage.setSqueezePressure(Value squeezePressure)
Set the squeeze pressure of this cement stage.
|
void |
WitsmlCementJob.CementStage.setSqueezePressureEnd(Value squeezePressureEnd)
Set the squeeze pressure end of this cement stage.
|
void |
WitsmlCementJob.setSqueezeTime(Value squeezeTime)
Set the squeeze time of this cement job.
|
void |
WitsmlWell.Crs.MapProjection.setStandardParallel1(Value standardParallel1)
Set the standard parallel1 of this map projection.
|
void |
WitsmlWell.Crs.MapProjection.setStandardParallel2(Value standardParallel2)
Set the standard parallel2 of this map projection.
|
void |
WitsmlRig.SurfaceEquipment.setStandpipeInnerDiameter(Value standpipeInnerDiameter) |
void |
WitsmlRigUtilization.SurfaceEquipment.setStandpipeInnerDiameter(Value standpipeInnerDiameter) |
void |
WitsmlRig.SurfaceEquipment.setStandpipeLength(Value standpipeLength) |
void |
WitsmlRigUtilization.SurfaceEquipment.setStandpipeLength(Value standpipeLength) |
void |
WitsmlRigUtilization.setStartHoleDepth(Value startHoleDepth) |
void |
WitsmlRigUtilization.setStartOperationTime(Value startOperationTime) |
void |
WitsmlOperationsReport.setStartTime(Value startTime)
Set the start time of this operations report.
|
void |
WitsmlCementJob.CementStage.setStartTubingPressure(Value startTubingPressure)
Set the start tubing pressure of this cement stage.
|
void |
WitsmlOperationsReport.setSteeringTime(Value steeringTime)
Set the steering time of this operations report.
|
void |
DrillingParameters.setSteeringTime(Value steeringTime) |
void |
WitsmlLog.setStepIncrement(Value stepIncrement)
Set the step increment of this log.
|
void |
WitsmlTarget.setStrike(Value strike)
Set the strike of this target.
|
void |
WitsmlRig.Pump.setStrokeLength(Value strokeLength) |
void |
WitsmlRigUtilization.Pump.setStrokeLength(Value strokeLength) |
void |
WitsmlRigUtilization.setStrokeMotionCompensation(Value strokeMotionCompensation) |
void |
Fluid.setSulfide(Value sulfide) |
void |
WitsmlRig.SurfaceEquipment.setSurfaceIronHeight(Value surfaceIronHeight) |
void |
WitsmlRigUtilization.SurfaceEquipment.setSurfaceIronHeight(Value surfaceIronHeight) |
void |
WitsmlRig.SurfaceEquipment.setSurfaceIronInnerDiameter(Value surfaceIronInnerDiameter) |
void |
WitsmlRigUtilization.SurfaceEquipment.setSurfaceIronInnerDiameter(Value surfaceIronInnerDiameter) |
void |
WitsmlRig.SurfaceEquipment.setSurfaceIronLength(Value surfaceIronLength) |
void |
WitsmlRigUtilization.SurfaceEquipment.setSurfaceIronLength(Value surfaceIronLength) |
void |
WitsmlRig.Bop.setSurfLineInnerDiameter(Value surfaceLineInnerDiameter) |
void |
WitsmlRigUtilization.Bop.setSurfLineInnerDiameter(Value surfaceLineInnerDiameter) |
void |
WitsmlRig.Bop.setSurfLineLength(Value surfaceLineLength) |
void |
WitsmlRigUtilization.Bop.setSurfLineLength(Value surfaceLineLength) |
void |
WitsmlRig.Bop.setSurfLineOuterDiameter(Value surfaceLineOuterDiameter) |
void |
WitsmlRigUtilization.Bop.setSurfLineOuterDiameter(Value surfaceLineOuterDiameter) |
void |
WitsmlRig.SurfaceEquipment.setSwivelInnerDiameter(Value swivelInnerDiameter) |
void |
WitsmlRigUtilization.SurfaceEquipment.setSwivelInnerDiameter(Value swivelInnerDiameter) |
void |
WitsmlRig.SurfaceEquipment.setSwivelLength(Value swivelLength) |
void |
WitsmlRigUtilization.SurfaceEquipment.setSwivelLength(Value swivelLength) |
void |
WitsmlCementJob.CementStage.setTailPipeDiameter(Value tailPipeDiameter)
Set the tail pipe diameter of this cement stage.
|
void |
Fluid.Rheometer.setTemperature(Value temperature) |
void |
WitsmlRig.Degasser.setTemperatureRating(Value temperatureRating) |
void |
WitsmlRigUtilization.Degasser.setTemperatureRating(Value temperatureRating) |
void |
WitsmlTubular.Component.setTensionYield(Value tensionYield)
Set the tension yield of this component.
|
void |
WitsmlTubular.Component.Connection.setTensionYield(Value tensionYield)
Set the tension yield of this connection.
|
void |
WitsmlCementJob.CementStage.Fluid.setThickeningConsistency(Value thickeningConsistency)
Set the thickening consistency of this fluid.
|
void |
WitsmlCementJob.CementStage.Fluid.setThickeningPressure(Value thickeningPressure)
Set the thickening pressure of this fluid.
|
void |
WitsmlCementJob.CementStage.Fluid.setThickeningTemperature(Value thickeningTemperature)
Set the thickening temperature of this fluid.
|
void |
WitsmlCementJob.CementStage.Fluid.setThickeningTime(Value thickeningTime)
Set the thickening time of this fluid.
|
void |
WitsmlTarget.setThicknessAbove(Value thicknessAbove)
Set the thickness above of this target.
|
void |
WitsmlTarget.Section.setThicknessAbove(Value thicknessAbove)
Set the thickness above of this section.
|
void |
WitsmlTarget.setThicknessBelow(Value thicknessBelow)
Set the thickness below of this target.
|
void |
WitsmlTarget.Section.setThicknessBelow(Value thicknessBelow)
Set the thickness below of this section.
|
void |
WitsmlTubular.Component.Connection.setThreadSize(Value threadSize)
Set the thread size of this connection.
|
void |
WitsmlCementJob.CementTest.setTimeBeforeLinerTopTest(Value timeBeforeLinerTopTest)
Set the time before liner top test of this cement test.
|
void |
WitsmlCementJob.CementTest.setTimeBetweenCementAndLogging(Value timeBetweenCementAndLogging)
Set the time between cement and logging of this cement test.
|
void |
WitsmlCementJob.CementTest.setTimeBetweenCementAndPit(Value timeBetweenCementAndPit)
Set the time between cement and pit of this cement test.
|
void |
WitsmlRealtime.Header.Interval.setTimeInterval(Value timeInterval)
Set the time interval of this interval.
|
void |
WitsmlOperationsReport.setTimeOnLocation(Value timeOnLocation)
Set the time on location of this operations report.
|
void |
WitsmlCementJob.CementStage.setTimePressureHeld(Value timePressureHeld)
Set the time pressure held of this cement stage.
|
void |
WitsmlTrajectory.Station.setToolfaceGravityAngle(Value toolfaceGravityAngle)
Set the toolface gravity angle of this station.
|
void |
WitsmlTrajectory.Station.setToolfaceMagneticAngle(Value toolfaceMagneticAngle)
Set the toolface magnetic angle of this station.
|
void |
WitsmlTubular.Component.Motor.setToolOffset(Value toolOffset)
Set the tool offset of this motor.
|
void |
WitsmlSidewallCore.setToolReferenceMd(Value toolReferenceMd)
Set the tool reference MD of this sidewall core.
|
void |
WitsmlRig.SurfaceEquipment.setTopStackHeight(Value topStackHeight) |
void |
WitsmlRigUtilization.SurfaceEquipment.setTopStackHeight(Value topStackHeight) |
void |
WitsmlRig.SurfaceEquipment.setTopStackInnerDiameter(Value topStackInnerDiameter) |
void |
WitsmlRigUtilization.SurfaceEquipment.setTopStackInnerDiameter(Value topStackInnerDiameter) |
void |
WitsmlTubular.Component.setTorqueYield(Value torqueYield)
Set the torque yield of this component.
|
void |
WitsmlTubular.Component.Connection.setTorqueYield(Value torqueYield)
Set the torque yield of this connection.
|
void |
WitsmlTubular.Component.setTorsionalStiffness(Value torsionalStiffness)
Set the torsional stiffness of this component.
|
void |
Fluid.setTotalCalciumHardness(Value totalCalciumHardness) |
void |
WitsmlTrajectory.Station.Validations.setTotalGeomagneticField(Value totalGeomagneticField)
Set the total geomagnetic field of this validations.
|
void |
WitsmlTrajectory.Station.Validations.setTotalGravitationalField(Value totalGravitationalField)
Set the total gravitational field of this validations.
|
void |
WitsmlStimJob.setTotalJobVolume(Value totalJobVolume) |
void |
WitsmlStimJob.setTotalProppantInFormation(Value totalProppantInFormation) |
void |
WitsmlStimJob.setTotalProppantUsed(Value totalProppantUsed) |
void |
WitsmlStimJob.setTotalPumpTime(Value totalPumpTime) |
void |
WitsmlCementJob.CementStage.Fluid.setTotalSlurryVolume(Value totalSlurryVolume)
Set the total slurry volume of this fluid.
|
void |
WitsmlStimJob.setTreatingBottomHoleTemperature(Value treatingBottomHoleTemperature) |
void |
WitsmlWell.Crs.MapProjection.setTrueScaleLatitude(Value trueScaleLatitude)
Set the true scale latitude of this map projection.
|
void |
WitsmlTrajectory.Station.setTurnRate(Value turnRate)
Set the turn rate of this station.
|
void |
WitsmlWellboreMarker.setTvd(Value tvd) |
void |
WitsmlOperationsReport.setTvd(Value tvd)
Set the TVD of this operations report.
|
void |
WitsmlDrillingReport.StatusInfo.setTvd(Value tvd) |
void |
WitsmlTarget.setTvd(Value tvd)
Set the TVD of this target.
|
void |
WitsmlTrajectory.Station.setTvd(Value tvd)
Set the TVD of this station.
|
void |
WitsmlFluidsReport.setTvd(Value tvd)
Set the TVD of this fluids report.
|
void |
WitsmlWellbore.setTvdBitCurrent(Value tvdBitCurrent)
Set the TVD bit current of this wellbore.
|
void |
WitsmlWellboreGeometry.Section.setTvdBottom(Value tvdBottom) |
void |
GeologyInterval.setTvdBottom(Value tvdBottom) |
void |
WitsmlWellbore.setTvdCurrent(Value tvdCurrent)
Set the TVD current of this wellbore.
|
void |
WitsmlRisk.setTvdEnd(Value tvdEnd)
Set the TVD end of this risk.
|
void |
WitsmlDrillingReport.StatusInfo.setTvdFormationStrength(Value tvdFormationStrength) |
void |
WitsmlWellbore.setTvdKickoff(Value tvdKickoff)
Set the TVD kickoff of this wellbore.
|
void |
WitsmlDrillingReport.StatusInfo.setTvdKickoff(Value tvdKickoff) |
void |
WitsmlDrillingReport.StatusInfo.setTvdLastCasingDiameter(Value tvdLastCasingDiameter) |
void |
WitsmlFormationMarker.setTvdLogSample(Value tvdLogSample)
Set the TVD log sample of this formation marker.
|
void |
WitsmlDrillingReport.StatusInfo.setTvdLot(Value tvdLot) |
void |
WitsmlDrillingReport.StatusInfo.setTvdPilotHolePlanned(Value tvdPilotHolePlanned) |
void |
WitsmlWellbore.setTvdPlanned(Value tvdPlanned)
Set the TVD planned of this wellbore.
|
void |
WitsmlFormationMarker.setTvdPrognosed(Value tvdPrognosed)
Set the TVD prognosed of this formation marker.
|
void |
WitsmlCementJob.setTvdShoe(Value tvdShoe)
Set the TVD shoe of this cement job.
|
void |
WitsmlRisk.setTvdStart(Value tvdStart)
Set the TVD start of this risk.
|
void |
WitsmlCementJob.setTvdStringShoe(Value tvdStringShoe)
Set the TVD string shoe of this cement job.
|
void |
WitsmlWellbore.setTvdSubSeaPlanned(Value tvdSubSeaPlanned)
Set the TVD sub sea planned of this wellbore.
|
void |
WitsmlWellboreGeometry.Section.setTvdTop(Value tvdTop) |
void |
GeologyInterval.setTvdTop(Value tvdTop) |
void |
WitsmlFormationMarker.setTvdTopSample(Value tvdTopSample)
Set the TVD top sample of this formation marker.
|
void |
WitsmlRig.SurfaceEquipment.setUmbilicalLength(Value umbilicalLength) |
void |
WitsmlRigUtilization.SurfaceEquipment.setUmbilicalLength(Value umbilicalLength) |
void |
WitsmlRig.SurfaceEquipment.setUmbilicalOuterDiameter(Value umbilicalOuterDiameter) |
void |
WitsmlRigUtilization.SurfaceEquipment.setUmbilicalOuterDiameter(Value umbilicalOuterDiameter) |
void |
WitsmlStimJob.StimJobMaterialCatalog.StimProppantAgent.setUnconfinedCompressiveStrength(Value unconfinedCompressiveStrength) |
void |
WitsmlTubular.Component.Jar.setUpSetForce(Value upSetForce)
Set the up set force of this jar.
|
void |
WitsmlTubular.Component.Jar.setUpTripForce(Value upTripForce)
Set the up trip force of this jar.
|
void |
WitsmlStimJob.setUsedHydraulicHorsepower(Value usedHydraulicHorsepower) |
void |
WitsmlToolErrorModel.IscwsaErrorTermValue.setValue(Value value) |
void |
WitsmlRigUtilization.setVarDeckLdMx(Value varDeckLdMx) |
void |
WitsmlRig.setVariableDeckLoadStormRating(Value variableDeckLoadStormRating) |
void |
WitsmlRigUtilization.setVdlStorm(Value vdlStorm) |
void |
WitsmlRig.Degasser.setVentLineInnerDiameter(Value ventLineInnerDiameter) |
void |
WitsmlRigUtilization.Degasser.setVentLineInnerDiameter(Value ventLineInnerDiameter) |
void |
WitsmlRig.Degasser.setVentLineLength(Value ventLineLength) |
void |
WitsmlRigUtilization.Degasser.setVentLineLength(Value ventLineLength) |
void |
WitsmlTrajectory.Station.setVerticalSectionDistance(Value verticalSectionDistance)
Set the vertical section distance of this station.
|
void |
WitsmlTrajectory.Station.CovarianceMatrix.setVerticalVertical(Value verticalVertical)
Set the vertical vertical of this covariance matrix.
|
void |
Fluid.Rheometer.setViscosimeter100rpm(Value viscosimeter100rpm) |
void |
Fluid.Rheometer.setViscosimeter200rpm(Value viscosimeter200rpm) |
void |
Fluid.Rheometer.setViscosimeter300rpm(Value viscosimeter300rpm) |
void |
Fluid.Rheometer.setViscosimeter3rpm(Value viscosimeter3rpm) |
void |
Fluid.Rheometer.setViscosimeter600rpm(Value viscosimeter600rpm) |
void |
Fluid.Rheometer.setViscosimeter6rpm(Value viscosimeter6rpm) |
void |
Fluid.Rheometer.Viscosity.setViscosity(Value viscosity)
Set the raw reading for a rheometer.
|
void |
WitsmlCementJob.CementStage.Fluid.setViscosity(Value viscosity)
Set the viscosity of this fluid.
|
void |
WitsmlDrillingReport.StatusInfo.setVolKickTol(Value volKickTol) |
void |
WitsmlCementJob.CementStage.Fluid.PumpSchedule.setVolume(Value volume)
Set the volume of this pump schedule.
|
void |
WitsmlCementJob.CementStage.setVolumeInsideCasing(Value volumeInsideCasing)
Set the volume inside casing of this cement stage.
|
void |
WitsmlCementJob.CementStage.setVolumeOfReturns(Value volumeOfReturns)
Set the volume of returns of this cement stage.
|
void |
WitsmlCementJob.CementStage.Fluid.setVolumeOther(Value volumeOther)
Set the volume other of this fluid.
|
void |
WitsmlCementJob.CementStage.setVolumeOutsideCasing(Value volumeOutsideCasing)
Set the volume outside casing of this cement stage.
|
void |
WitsmlCementJob.CementStage.Fluid.setVolumePumped(Value volumePumped)
Set the volume pumped of this fluid.
|
void |
WitsmlCementJob.setWaitingOnCementTime(Value waitingOnCementTime)
Set the waiting on cement time of this cement job.
|
void |
WitsmlTubular.Component.setWallThickness(Value wallThickness)
Set the wall thickness of this component.
|
void |
WitsmlTubular.Component.setWallWear(Value wallWear)
Set the wall wear of this component.
|
void |
Fluid.setWater(Value water) |
void |
WitsmlWellboreGeometry.setWaterDepth(Value waterDepth) |
void |
WitsmlWell.setWaterDepth(Value waterDepth)
Set the water depth of this well.
|
void |
WitsmlRig.setWaterDepthRating(Value waterDepthRating) |
void |
WitsmlCementJob.CementStage.Fluid.setWaterMixRatio(Value waterMixRatio)
Set the water mix ratio of this fluid.
|
void |
WitsmlCementJob.CementStage.Fluid.setWaterVolume(Value waterVolume)
Set the water volume of this fluid.
|
void |
DrillingParameters.setWeightAboveJar(Value weightAboveJar) |
void |
DrillingParameters.setWeightBelowJar(Value weightBelowJar) |
void |
WitsmlWellboreGeometry.Section.setWeightPerLength(Value weightPerLength) |
void |
WitsmlWell.setWellHeadElevation(Value wellHeadElevation)
Set the well head elevation of this well.
|
void |
Location.setWesting(Value westing) |
void |
DrillingParameters.setWobAverage(Value wobAverage) |
void |
DrillingParameters.setWobAverageDownhole(Value wobAverageDownhole) |
void |
DrillingParameters.setWobMax(Value wobMax) |
void |
DrillingParameters.setWobMin(Value wobMin) |
void |
WitsmlRig.Bop.setWorkingPressure(Value workingPressure) |
void |
WitsmlRig.Bop.Component.setWorkingPressure(Value workingPressure) |
void |
WitsmlRigUtilization.Bop.setWorkingPressure(Value workingPressure) |
void |
WitsmlRigUtilization.Bop.Component.setWorkingPressure(Value workingPressure) |
void |
WitsmlRigUtilization.setWtBlock(Value wtBlock) |
void |
Location.setX(Value x) |
void |
Location.setXLocal(Value xLocal) |
void |
WitsmlWell.Crs.GeodeticModel.setXRotation(Value xRotation)
Set the x rotation of this geodetic model.
|
void |
WitsmlWell.Crs.GeodeticModel.setXTranslation(Value xTranslation)
Set the x translation of this geodetic model.
|
void |
Location.setY(Value y) |
void |
WitsmlWell.Crs.LocalCrs.setYAxisAzimuth(Value yAxisAzimuth)
Set the y axis azimuth of this local crs.
|
void |
Fluid.setYieldPoint(Value yieldPoint) |
void |
WitsmlCementJob.CementStage.Fluid.setYieldPoint(Value yieldPoint)
Set the yield point of this fluid.
|
void |
WitsmlCementJob.CementStage.setYieldPointMud(Value yieldPointMud)
Set the yield point mud of this cement stage.
|
void |
Location.setYLocal(Value yLocal) |
void |
WitsmlWell.Crs.GeodeticModel.setYRotation(Value yRotation)
Set the y rotation of this geodetic model.
|
void |
WitsmlWell.Crs.GeodeticModel.setYTranslation(Value yTranslation)
Set the y translation of this geodetic model.
|
void |
WitsmlWell.Crs.GeodeticModel.setZRotation(Value zRotation)
Set the z rotation of this geodetic model.
|
void |
WitsmlWell.Crs.GeodeticModel.setZTranslation(Value zTranslation)
Set the z translation of this geodetic model.
|
Modifier and Type | Method and Description |
---|---|
Value |
WitsmlUnitManager.toBaseUnit(Value value)
Convert the specified value instance to base unit
if possible.
|
Modifier and Type | Method and Description |
---|---|
Value |
WitsmlUnitManager.toBaseUnit(Value value)
Convert the specified value instance to base unit
if possible.
|
Modifier and Type | Method and Description |
---|---|
static Value |
XmlUtil.getChildValue(Element element,
String childName,
Value defaultValue)
Return the text content of the child of the specified element as a
WITSML value.
|
Modifier and Type | Method and Description |
---|---|
static Value |
XmlUtil.getChildValue(Element element,
String childName,
Value defaultValue)
Return the text content of the child of the specified element as a
WITSML value.
|
Copyright © 2023 Petroware AS - https://petroware.no